TMRC Legacy 30 STL Pack

DISCLAIMER

This is a digital STL file. No physical product will be shipped.
All sales are final. Due to the nature of digital downloads, no refunds or exchanges are offered.
Files are for personal use only. Redistribution, resale, sharing, or commercial printing is prohibited.
This is an original Tremendous Marine RC design and is not affiliated with, endorsed by, or associated with any real-world boat manufacturer.

---

TMRC Legacy 30 — STL Pack

30” Single Outboard Center Console

NOW AVAILABLE FOR 250 × 250 mm BUILD PLATES. The pack now includes a version segmented for 250 × 250 mm printers alongside the original 290 × 290 mm files.

The TMRC Legacy 30 is an all-new original center console designed from the ground up by Tremendous Marine RC. Inspired by the clean lines and versatility of modern offshore boats, the Legacy 30 delivers a premium RC platform that's equally at home on the water or on display.

Designed specifically for builders, the model is optimized for 290 × 290 mm build plates, allowing the major hull sections to be printed without unnecessary splitting — reducing print time and simplifying assembly. A 250 × 250 mm version is also included for builders with smaller printers.

---

Specifications

• Overall Length: 30” (762 mm)
• Motor Setup: Single outboard
• Minimum printer build volume: 250 × 250 mm (250 × 250 and 290 × 290 versions included)
• Highly detailed deck, console, seating, and hardtop
• Lightweight yet durable design

---

TMRC V3 Compatible

Fully compatible with all current TMRC V3 Outboard Systems:

• Mercury 300X V3
• Mercury Pro 400 V3
• Yamaha 425 V3
• Suzuki DF300 V3

---

Recommended Electronics

• 3660 water-cooled brushless motor
• 4S LiPo battery
• Water-cooled ESC
• Standard steering servo

---

What's Included

• Complete STL file package — hull, deck, console, hardtop, interior, seating, outboard mount
• Files for both 290 × 290 mm and 250 × 250 mm build plates
• Assembly manual (PDF)
• Personal use license

---

Recommended Print Settings

• Material: PETG / ABS
• Walls: 4
• Infill: 5% (3D Honeycomb)
• Layer Height: 0.2–0.28 mm
• Supports: Only where required
• Increase infill around the transom and motor mount

---

Filament

Printed in SUNLU PETG. Get it here (affiliate link): https://store.sunlu.com?sca_ref=11554757.OetPZf1JlD&utm_source=sunluaffiliate&utm_medium=sunluaffiliate&utm_campaign=sunluaffiliate

---

Pre-Order

This is a pre-order listing. The Legacy 30 is currently undergoing final print validation and on-water testing. By purchasing today you reserve your copy and receive the complete STL package immediately upon official release.

---

Digital Download Only

No hardware, motors, electronics, shafts, couplers, or drive components included.

---

TMRC
Handcrafted performance.
Built by enthusiasts, for enthusiasts.

Stay Tremendous.