Tremendous Marine RC
TMRC Legacy 21 STL Pack
TMRC Legacy 21 STL Pack
Couldn't load pickup availability
Digital STL files, not a physical boat.
Download the build guide (PDF)
TMRC Legacy 21 — STL Pack
Single Outboard Center Console — prints on 250 × 250 mm build plates
The Legacy 21 is a clean, classic center console from Tremendous Marine RC. Low-profile console with rod holders, open bow seating, a cooler-style servo cover in the cockpit, and a single TMRC V3 outboard on a setback bracket. It's a straightforward build with a short parts list, and every piece fits a standard 250 × 250 mm printer.
A full step-by-step build guide (PDF) comes with the files: parts list, print settings for every part, hull assembly, sealing, electronics install and first-run setup.
Specifications
- Hull Length: about 30 in (756 mm)
- Length Overall (with outboard): 36.4 in (925 mm)
- Beam: 11.3 in (288 mm)
- Motor Setup: Single outboard — TMRC V3 platform with steering ram
- Minimum printer build volume: 250 × 250 mm bed, 240 mm Z height
- Parts: 13 STL files — 4-piece hull with alignment pins
TMRC V3 Compatible
The transom bracket is built for the TMRC V3 outboard system. Any V3 outboard — as an STL pack, a fully printed motor, or a complete drive kit — bolts on. Shop V3 outboards →
Recommended Electronics
- Brushless motor for the V3 outboard (35 mm mount)
- Water-cooled ESC
- 4S LiPo battery
- Standard waterproof steering servo
- 44 mm 3-blade prop
What's Included
- 4-piece hull (bow, forward, mid and transom sections) with centering pins
- Bow, cockpit and aft floors
- Center console with rod holders
- Seat cushions and cushion support rail
- Cooler-style servo cover
- Outboard engine bracket
- Step-by-step build guide (PDF)
- Personal use license
Recommended Print Settings
- Material: PETG / ABS
- Hull: 4 walls, 5% infill (3D Honeycomb)
- Engine bracket and centering pins: 100% infill
- Everything else: 4 walls, 5% infill
- Layer Height: 0.2–0.28 mm
- Supports: Only where required
- Increase infill around the transom
Filament
Printed in SUNLU PETG. Get it here (affiliate link): SUNLU PETG filament
Digital Download Only
No hardware, motors, electronics, shafts, couplers, or drive components included.
DISCLAIMER
This is a digital STL file. No physical product will be shipped.
All sales are final. Due to the nature of digital downloads, no refunds or exchanges are offered.
Files are for personal use only. Redistribution, resale, sharing, or commercial printing is prohibited.
This is an original Tremendous Marine RC design and is not affiliated with, endorsed by, or associated with any real-world boat manufacturer.
TMRC
Handcrafted performance.
Built by enthusiasts, for enthusiasts.
Stay Tremendous.
Share
