TMRC Freedom 56 Pilot House Edition — Complete STL Pack

DISCLAIMER

This is a digital STL file. No physical product will be shipped.
All sales are final. Due to the nature of digital downloads, no refunds or exchanges are offered.
Files are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.
This is an original Tremendous Marine RC design and is not affiliated with, endorsed by, or associated with any real-world boat manufacturer.

---

TMRC FREEDOM 56 – PILOT HOUSE EDITION | COMPLETE STL PACK

The complete 56-inch catamaran. Hull, pilot house, and full tower in one pack.

At roughly 56 inches long in 1/12 scale, the Freedom 56 is a massive RC catamaran built for people who want serious size, detail, performance, and presence. This package includes the all-new pilot house, the full tower, and a 250 × 250 mm split-print configuration.

This is the complete package. You do not need to own or buy the original Freedom 56 files separately — everything needed to print the Pilot House Edition from the ground up is included.

Build it with the clean pilot house configuration or take it all the way with the full tower setup. Both are included.

---

Specifications

• Scale: 1/12
• Length Overall: approx. 56 in
• Hull: Catamaran
• Transom: Quad-outboard capable
• Configurations: Pilot house or full tower
• Designed for: FDM 3D printers

---

What's Included

• Complete Freedom 56 catamaran hull
• Full pilot house configuration
• Full tower configuration
• Complete deck and structural components
• Quad-outboard capable transom
• Detailed exterior components
• Full-size STL files
• Split STL version for 250 × 250 mm printers
• TMRC recommended print settings and build guidance

---

Recommended Print Settings

• Material: PETG / ABS
• Walls: 4
• Infill: 5% (3D Honeycomb)
• Layer Height: 0.2–0.28 mm
• Supports: Only where required
• Increase infill around the transom and motor mounts

---

Filament

Printed in SUNLU PETG. Get it here (affiliate link): https://store.sunlu.com?sca_ref=11554757.OetPZf1JlD&utm_source=sunluaffiliate&utm_medium=sunluaffiliate&utm_campaign=sunluaffiliate

---

Printer Compatibility

You don't need a massive-format printer to build a massive RC boat. The split version is designed to fit printers with a minimum 250 × 250 mm build area — print the sections, assemble the hull, and put together one seriously impressive RC catamaran.

---

Digital Download Only

No hardware, motors, electronics, shafts, couplers, or drive components included.

---

TMRC
Handcrafted performance.
Built by enthusiasts, for enthusiasts.

Stay Tremendous.