Lightweight 4S LiPo Battery Holder (7200mAh / 14.8V / 60C) | STL

DISCLAIMER

This is a digital STL file. No physical product will be shipped.
All sales are final. Due to the nature of digital downloads, no refunds or exchanges are offered.
Files are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.
This is an original Tremendous Marine RC design and is not affiliated with, endorsed by, or associated with any real-world boat manufacturer.

---

LIGHTWEIGHT 4S LIPO BATTERY HOLDER — STL FILE

Keeps your pack locked down at speed, without adding bulk.

Designed to fit high-capacity packs like the 7200 mAh 14.8V 60C LiPo, this holder powers Tremendous Marine RC's entire line of center console boats. Engineered for durability without weight, it keeps the battery locked in place at top speed and through sharp turns, with the weight centered for better balance and handling.

---

Specifications

• Battery: 4S / 14.8V, 7200 mAh range
• Discharge Rate: Designed around 60C continuous / 120C burst packs
• Connectors: XT90 (EC5 also supported)
• Pack Size: Fits most standard hardcase 4S 7200 mAh LiPos
• Hull Compatibility: TMRC 28″, 36″, 43″, and 55″ hulls
• Designed for: FDM 3D printers

---

What's Included

• (1) Lightweight 4S LiPo Battery Holder STL file

---

Recommended Print Settings

• Material: PETG / ABS
• Walls: 4
• Infill: 5% (3D Honeycomb)
• Layer Height: 0.2–0.28 mm
• Supports: Only where required
• Increase infill around the mounting points on high-power builds

---

Filament

Printed in SUNLU PETG. Get it here (affiliate link): https://store.sunlu.com?sca_ref=11554757.OetPZf1JlD&utm_source=sunluaffiliate&utm_medium=sunluaffiliate&utm_campaign=sunluaffiliate

---

Digital Download Only

No batteries, connectors, hardware, or electronics included.

---

TMRC
Handcrafted performance.
Built by enthusiasts, for enthusiasts.

Stay Tremendous.