TMRC Carolina 26CC STL

DISCLAIMER

This is a digital STL file. No physical product will be shipped.
All sales are final. Due to the nature of digital downloads, no refunds or exchanges are offered.
Files are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.
This is an original Tremendous Marine RC design and is not affiliated with, endorsed by, or associated with any real-world boat manufacturer. All brand names are referenced strictly for descriptive and inspirational purposes only.

---

TMRC Carolina 26CC — STL Pack

Offshore-Style Twin Outboard Platform

The TMRC Carolina 26 is a detailed 3D printable RC boat model designed for builders who want a clean, aggressive offshore-style platform with a strong foundation for a twin-outboard setup.

This model is built for hobbyists who want a serious project with premium presence on the water and a hull that can be reinforced, finished, and customized into a standout build.

---

Specifications

• Length: 863 mm
• Beam: 272 mm
• Motor Setup: 2x TMRC outboards
• Recommended ESC: 90A–150A water-cooled

---

What's Included

• Carolina 26 STL files
• Multi-part hull for printing and assembly
• RC-ready platform for twin-outboard setup
• TMRC design built for custom finishing and reinforcement

---

Recommended Print Settings

• Material: PETG / ABS
• Walls: 4
• Infill: 5% (3D Honeycomb)
• Layer Height: 0.2–0.28 mm
• Supports: Only where required
• Increase infill around the transom and high-stress mounting areas

---

Filament

Printed in SUNLU PETG. Get it here (affiliate link): https://store.sunlu.com?sca_ref=11554757.OetPZf1JlD&utm_source=sunluaffiliate&utm_medium=sunluaffiliate&utm_campaign=sunluaffiliate

---

Assembly Notes

The Carolina 26 is designed to be assembled in sections. For best results:

• Install M5 heat inserts (6.5 mm OD) first
• Dry-fit all sections before final bonding
• Use 2-part epoxy on mating surfaces
• Screw sections together before epoxy cures
• Reinforce the interior with fiberglass resin after assembly
• Fiberglass cloth can be added for maximum strength

---

Finish Recommendations

• Sand progressively from 120 → 220 → 400 grit
• Apply 3–5 coats of filler primer
• Use body filler where needed
• Wet sand and re-prime until smooth
• Rust-Oleum Marine Topside is recommended for final paint
• Allow full cure before final wet sanding and buffing

---

Cooling & Water Pickup Notes

Water pumps are recommended. Water pickups can be drilled through the hull floor and installed using brass tubing. All penetrations should be sealed properly to prevent water intrusion.

---

Digital Download Only

No hardware, motors, electronics, shafts, couplers, or drive components included.
This model requires modification, fitting, and tuning during assembly. It is intended for builders with a working understanding of RC boats, electronics installation, and cooling system routing. This is not a beginner platform.

---

TMRC
Handcrafted performance.
Built by enthusiasts, for enthusiasts.

Stay Tremendous.