Pre Order TMRC Trojan 55 STL Pack

Image note: The picture above is an AI-generated rendering, not the actual boat. To see the actual Trojan 55, watch the video of the model on the computer in the product gallery.

DISCLAIMER

This is a digital STL file. No physical product will be shipped.
All sales are final. Due to the nature of digital downloads, no refunds or exchanges are offered.
Files are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.
This is an original Tremendous Marine RC design and is not affiliated with, endorsed by, or associated with any real-world boat or engine manufacturer.

---

TMRC TROJAN 55

Twin inboard, straight shaft. 55 inches long. Prints on a 420 × 420 mm bed.

Pre-order price: $59.99. Price goes to $119.99 on official release.

A big twin-inboard RC boat running straight-shaft drives. At 55″ (1397 mm) long, the Trojan 55 is one of the largest TMRC designs yet, and it comes with a full bill of materials so you know exactly what to buy and where to get it.

This is a DIY RC project. Builders are responsible for printing, assembly, waterproofing, electronics installation, setup, and safe operation. Basic 3D-printing and RC experience is recommended.

---

Specifications

• Length: 55″ / 1397 mm
• Power: Twin inboard
• Drive: Straight shaft
• Minimum Printer: 420 × 420 mm (e.g. Anycubic Kobra 3 Max)
• Designed for: FDM 3D printers

---

What's Included

• Complete Trojan 55 STL file package
• Full BOM (bill of materials) with sources for every part
• Designed as a fully functional RC boat

---

Recommended Print Settings

• Material: PETG / ABS
• Hull: 4 walls, 5% infill
• Rollbars / towers: 100% infill
• Increase infill around the transom, shaft exits and motor mounts

---

Filament

Printed in SUNLU PETG. Get SUNLU PETG here (affiliate link).

---

Printer Compatibility

The Trojan 55 is sized for printers with a minimum 420 × 420 mm build area, such as the Anycubic Kobra 3 Max. You may be able to print it on a smaller printer, but a split version for smaller beds is not offered at this time.

Get the Anycubic Kobra 3 Max here (Amazon affiliate link).

---

Pre-Order

This is a pre-order. Files are not available for immediate download. The Trojan 55 is a large build and will take some time. The final STL package and BOM are expected to be available in approximately three months. Release timing is subject to final testing and development, and minor revisions may be made before release to improve printability, fitment, durability, or performance.

All pre-order sales are final — no refunds, returns, exchanges, or cancellations.

---

Digital Download Only

No hardware, motors, electronics, batteries, filament, paint, shafts, couplers, or drive components included. The BOM lists where to source them.

---

TMRC
Handcrafted performance.
Built by enthusiasts, for enthusiasts.

Stay Tremendous.