{"product_id":"tmrc-predator-36cc-stl-pack-prototype","title":"TMRC Predator 36CC STL Pack — Prototype Drop","description":"\u003ch2\u003e⚠️ PROTOTYPE DISCLAIMER — READ BEFORE BUYING\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis boat has NOT been printed by TMRC yet.\u003c\/strong\u003e We have designed and printed many boats in the past, but this one has not gone through our usual test print and water test. You are buying the first-release files as-is, at a discounted prototype price for exactly that reason.\u003c\/p\u003e\n\u003cp\u003eMinor fit-ups or design revisions may follow once we print it ourselves. Every prototype buyer receives the updated files by email when the final version is released. If you want a fully print-tested pack, pick one from the Ready to Print collection.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTMRC PREDATOR 36CC\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA 36-inch offshore center console with a hardtop, twin bucket helm seats and twin outboards — the big brother of the Raptor 30CC, built for the TMRC V3 outboard platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Predator 36CC takes everything builders liked about the Raptor and scales it up to a twin-engine offshore machine. Full center-console layout with a forward console lounge, a hardtop with rod holders, twin bucket seats at the helm, wraparound bow seating, and a pair of outboards hanging off the transom. Print it split on a standard 250 × 250 mm printer, or full-width on a 350 × 350 mm machine for fewer seams.\u003c\/p\u003e\n\u003ch3\u003eTwin TMRC V3 outboards — ready to bolt up\u003c\/h3\u003e\n\u003cp\u003eThe transom is designed around a pair of \u003cstrong\u003eTMRC V3 outboards\u003c\/strong\u003e, built on TFL lower units with 3660 brushless motor mounts and a steering ram. Any V3 outboard — as an STL pack, a fully printed ABS-CF motor, or a complete drive kit — bolts straight on. \u003ca href=\"\/collections\/outboard-motors-stl\"\u003eShop V3 outboards →\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 36 in (913 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Overall (with outboards):\u003c\/strong\u003e 43.5 in (1,104 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 12.9 in (327 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to hardtop):\u003c\/strong\u003e 12.6 in (318 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Twin outboards — TMRC V3 platform, TFL lower units, 35 mm brushless motor mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Offshore center console with hardtop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers — split version for 250 × 250 mm beds, full-width version for 350 × 350 mm beds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete hull and deck with twin-outboard transom\u003c\/li\u003e\n\u003cli\u003eCenter console with forward console lounge\u003c\/li\u003e\n\u003cli\u003eHardtop with rod holders\u003c\/li\u003e\n\u003cli\u003eTwin bucket helm seats\u003c\/li\u003e\n\u003cli\u003eWraparound bow seating and cushions\u003c\/li\u003e\n\u003cli\u003eTwin scale outboard cowlings (display — V3 motors, lower units and electronics sold separately)\u003c\/li\u003e\n\u003cli\u003eSteering ram mount and deck details\u003c\/li\u003e\n\u003cli\u003eComplete STL pack in two versions: split for 250 × 250 mm printers and full-width for 350 × 350 mm printers\u003c\/li\u003e\n\u003cli\u003eLicense \u0026amp; Disclaimer PDF with suggested print settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSuggested Print Settings\u003c\/h3\u003e\n\u003cp\u003eOur usual TMRC settings. This design hasn't been test-printed by us yet, so treat them as a starting point and check transom fit before committing to the whole hull.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS \/ ABS-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb or gyroid) — 15–20% around the transom, 100% on motor mounts and the hardtop frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop \/ Bottom:\u003c\/strong\u003e 4 \/ 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required (bow sections, hardtop, console overhangs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Glue sections with CA or epoxy, fill and sand seams, seal the hull interior before electronics go in. Split version: glue the centerline halves, then fill and sand the seam before glassing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" rel=\"noopener sponsored\" target=\"_blank\"\u003ehttps:\/\/store.sunlu.com\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":46383222685781,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-10-16173431.png?v=1792187645","url":"https:\/\/tremendousmarinerc.com\/products\/tmrc-predator-36cc-stl-pack-prototype","provider":"Tremendous Marine RC","version":"1.0","type":"link"}