{"title":"Black Friday Sale","description":"\u003cp\u003e50% off every STL file, Friday Nov 27 through Cyber Monday Nov 30. The discount comes off automatically at checkout. Digital Pass members: use code BFPASS60 for 60%.\u003c\/p\u003e","products":[{"product_id":"lightweight-4s-lipo-battery-holder-7200mah-14-8v-60c-stl","title":"Lightweight 4S LiPo Battery Holder (7200mAh \/ 14.8V \/ 60C) | STL","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eLIGHTWEIGHT 4S LIPO BATTERY HOLDER — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKeeps your pack locked down at speed, without adding bulk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to fit high-capacity packs like the 7200 mAh 14.8V 60C LiPo, this holder powers Tremendous Marine RC's entire line of center console boats. Engineered for durability without weight, it keeps the battery locked in place at top speed and through sharp turns, with the weight centered for better balance and handling.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 4S \/ 14.8V, 7200 mAh range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Rate:\u003c\/strong\u003e Designed around 60C continuous \/ 120C burst packs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e XT90 (EC5 also supported)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e Fits most standard hardcase 4S 7200 mAh LiPos\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Compatibility:\u003c\/strong\u003e TMRC 28″, 36″, 43″, and 55″ hulls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Lightweight 4S LiPo Battery Holder STL file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the mounting points on high-power builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo batteries, connectors, hardware, or electronics included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":41665402732629,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/bb.png?v=1756429470"},{"product_id":"desk-display-stand-for-apex-47-yellowfin-39-stl-tremendous-marine-rc","title":"Desk Display Stand for Apex 47 (Yellowfin 39 STL) | Tremendous Marine RC","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDESK DISPLAY STAND FOR APEX 47 — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eYour build isn't just an RC boat. Display it like it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA custom desk display stand designed specifically for the Apex 47 Tower Edition STL — the right way to show your printed RC boat when it isn't on the water.\u003c\/p\u003e\n\u003cp\u003eEngineered for stability and clean presentation, the stand cradles the hull securely while highlighting the boat's lines and tower detail. Works with painted and raw printed hulls alike, and suits a desk, shelf, or showcase.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Desk display stand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e TMRC Apex 47 Tower Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStance:\u003c\/strong\u003e Clean angled presentation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Desk Display Stand STL file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill in the cradle arms if displaying a fully built hull\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003eSand and paint for a premium showcase look, or print in a contrasting filament to make the hull the focal point.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical stand, hull, hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":41665444053077,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/2112.png?v=1756435327"},{"product_id":"freeman-47-tower-add-on-stl-pack","title":"Freeman 47 Tower Add-On STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFREEMAN 47 TOWER ADD-ON — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe offshore Tower Edition look, engineered to fit the Freeman 47 STL Pack.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTake your Freeman 47 build to the next level with the official Tower Add-On Pack. Engineered for a perfect fit with the Freeman 47 STL Pack, this upgrade brings sleek geometry, scale realism, and a bold stance worthy of the real offshore beast.\u003c\/p\u003e\n\u003cp\u003eEvery file is optimized for FDM and resin printing, with reinforced geometry and precise alignment for smooth assembly and maximum strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Tower add-on \/ upgrade pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e TMRC Freeman 47 STL Pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Aligned to the Freeman 47 mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Format:\u003c\/strong\u003e Separated sections for easy scaling and fitment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM and resin 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an add-on.\u003c\/strong\u003e The Freeman 47 hull files are not included and must be purchased separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTower structure and support framework\u003c\/li\u003e\n\u003cli\u003eUpper helm and control area\u003c\/li\u003e\n\u003cli\u003eMounting points aligned with the Freeman 47 STL Pack\u003c\/li\u003e\n\u003cli\u003eSections split for easier printing and assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 100% — towers and rollbars are printed solid for full strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.16–0.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":41788474458197,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/tower22.png?v=1761093393"},{"product_id":"tmrc-reaper-47-stl-file-pack","title":"TMRC Reaper 47 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e The TMRC Reaper 47 is a 48.7 in (1236 mm) 3D printable RC hull built for quad outboards. The pack includes files segmented for 250 × 250 mm build plates and for large-format printers (Anycubic Kobra 3 Max). It's a high-power platform for experienced builders, not a first build.\u003c\/p\u003e\n\u003cdiv style=\"border:1px solid #d0d7de;border-radius:8px;padding:12px 16px;margin:16px 0;\"\u003e\n\u003ch3 style=\"margin-top:0;\"\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 48.7\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 250 × 250 mm printers or Anycubic Kobra 3 Max. Both versions included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e quad outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel:\u003c\/strong\u003e experienced builders, not a first build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat only.\u003c\/strong\u003e No hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 48.7 in (1236 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width (Beam):\u003c\/strong\u003e 11.3 in (288 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Quad outboard (primary design intent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer build volume:\u003c\/strong\u003e 250 × 250 mm (250 × 250 and Kobra 3 Max versions included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003eDesigned to run with the \u003ca href=\"https:\/\/tremendousmarinerc.com\/products\/pre-order-motor\" target=\"_blank\" rel=\"noopener\"\u003eTMRC 3548 Outboards\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilder-defined motor selection, spacing, and reinforcement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files for the Reaper 47 hull and components\u003c\/li\u003e\n\u003cli\u003ePrint-optimized, pre-segmented hull sections\u003c\/li\u003e\n\u003cli\u003eTwo segmentations: large-format (Anycubic Kobra 3 Max) and 250 × 250 mm build plates\u003c\/li\u003e\n\u003cli\u003eFiles prepared for quad motor layouts and builder customization\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and high-stress mounting areas\u003c\/li\u003e\n\u003cli\u003ePrint hull sections in the provided orientation — do not rotate parts to reduce print time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility \u0026amp; File Preparation\u003c\/h3\u003e\n\u003cp\u003eThe Reaper 47 STL Pack was originally designed and pre-segmented for the \u003cstrong\u003eAnycubic Kobra 3 Max\u003c\/strong\u003e, allowing the hull and components to be printed efficiently with minimal additional preparation. A \u003cstrong\u003e250 × 250 mm version\u003c\/strong\u003e is now included so the Reaper can be printed on standard-size printers as well.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-format files optimized for Kobra 3 Max build volume\u003c\/li\u003e\n\u003cli\u003e250 × 250 mm files pre-segmented for standard build plates — more sections, more assembly\u003c\/li\u003e\n\u003cli\u003eParts are pre-sliced to maximize strength and print efficiency\u003c\/li\u003e\n\u003cli\u003ePrinters smaller than 250 × 250 mm may require additional cutting or re-segmentation of parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003cbr\u003eFinal fitment, strength, and performance depend on print settings, materials, and assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDISCLAIMER\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42107912257621,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/ChatGPT_Image_Feb_16_2026_10_16_09_PM.png?v=1771298209"},{"product_id":"tmrc-outboard-bracket","title":"TMRC Outboard Bracket STL","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC FLAT TRANSOM OUTBOARD BRACKET ADAPTER\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRun the newer TMRC outboard system on flat-transom hulls — no custom drilling.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter mounts TMRC outboard brackets to flat-transom RC boats, letting older hulls and legacy builds run the newer outboard system using the existing bracket mounting pattern.\u003c\/p\u003e\n\u003cp\u003eNo guesswork. The part bolts up clean using the bracket's four factory mounting holes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flat transom outboard bracket adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e TMRC outboard bracket, 4 factory holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Print flat with the transom face on the build plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file(s) for the Flat Transom Outboard Bracket Adapter\u003c\/li\u003e\n\u003cli\u003ePrint-ready geometry optimized for strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS \/ ABS-CF (preferred), ASA, or PETG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 30%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.20–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop \/ Bottom:\u003c\/strong\u003e 6–8 layers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5 heat-set threaded inserts\u003c\/strong\u003e installed in the transom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM5 stainless steel mounting screws\u003c\/strong\u003e through the 4 existing bracket holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine sealant (3M 5200) or 2-part epoxy\u003c\/strong\u003e between the adapter and transom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSealant or epoxy is \u003cstrong\u003erequired\u003c\/strong\u003e to prevent movement, water intrusion, and long-term stress on the fasteners.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a DIY RC performance component — proper installation is critical for strength and reliability\u003c\/li\u003e\n\u003cli\u003eTest fit before final assembly\u003c\/li\u003e\n\u003cli\u003eMinor sanding or tolerance adjustment may be required depending on printer and material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42117671977045,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/drdr.png?v=1770000251"},{"product_id":"transom-adapter-bracket-twin-quad","title":"Transom Adapter Bracket TWIN\/QUAD","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFREEMAN TRANSOM ADAPTER BRACKET — TWIN \/ QUAD\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePut the 3548 outboard system on an existing Freeman hull. No hull redesign, no reprint.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Freeman Transom Adapter Bracket lets TMRC's 3548 outboard motor system install on existing Freeman hulls originally designed for flat transom motor mounts, bridging the original transom geometry to support single, twin, or quad outboard configurations.\u003c\/p\u003e\n\u003cp\u003eLegacy Freeman hulls were never designed for the mounting geometry or torque loads of modern 3548 outboards. This adapter corrects outboard mounting alignment, provides proper transom spacing, distributes load across reinforced mounting surfaces, supports higher-torque quad setups, and eliminates the need to modify or reprint the hull.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint it. Install it. Scale your build.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Transom adapter bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e TMRC 3548 outboard motor assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurations:\u003c\/strong\u003e Single, twin, or quad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Compatibility:\u003c\/strong\u003e Freeman hulls originally designed for flat transom motor mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Print flat on the transom face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot designed for non-Freeman hulls or custom transoms unless modified by the user.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFreeman Transom Adapter Bracket STL\u003c\/li\u003e\n\u003cli\u003ePrint-ready geometry optimized for strength\u003c\/li\u003e\n\u003cli\u003eDesigned for direct integration with existing Freeman hull files\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG, ASA, or ABS-CF (recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4–6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 30% (Gyroid or Cubic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.20 mm (required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis part was designed and tested specifically at 0.20 mm layer height and 30% infill for optimal strength, dimensional accuracy, and vibration resistance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuad motor configurations increase stress — print settings and quality control are critical\u003c\/li\u003e\n\u003cli\u003eMinor sanding or fitment adjustment may be required depending on printer tolerances\u003c\/li\u003e\n\u003cli\u003eAlways test at low power before full operation\u003c\/li\u003e\n\u003cli\u003eYou are responsible for print quality, material choice, assembly, and final use; files are provided as-is, without warranties of any kind\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, hull files, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Freeman Boatworks or any other manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42123045666901,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/freemanbrackewt.png?v=1770138754"},{"product_id":"tmrc-carolina-26cc-stl-pack","title":"TMRC Carolina 26CC STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Carolina 26CC — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOffshore-Style Twin Outboard Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TMRC Carolina 26 is a detailed 3D printable RC boat model designed for builders who want a clean, aggressive offshore-style platform with a strong foundation for a twin-outboard setup.\u003c\/p\u003e\n\u003cp\u003eThis model is built for hobbyists who want a serious project with premium presence on the water and a hull that can be reinforced, finished, and customized into a standout build.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 863 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 272 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e 2x TMRC outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended ESC:\u003c\/strong\u003e 90A–150A water-cooled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarolina 26 STL files\u003c\/li\u003e\n\u003cli\u003eMulti-part hull for printing and assembly\u003c\/li\u003e\n\u003cli\u003eRC-ready platform for twin-outboard setup\u003c\/li\u003e\n\u003cli\u003eTMRC design built for custom finishing and reinforcement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and high-stress mounting areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Notes\u003c\/h3\u003e\n\u003cp\u003eThe Carolina 26 is designed to be assembled in sections. For best results:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall \u003cstrong\u003eM5 heat inserts (6.5 mm OD)\u003c\/strong\u003e first\u003c\/li\u003e\n\u003cli\u003eDry-fit all sections before final bonding\u003c\/li\u003e\n\u003cli\u003eUse \u003cstrong\u003e2-part epoxy\u003c\/strong\u003e on mating surfaces\u003c\/li\u003e\n\u003cli\u003eScrew sections together before epoxy cures\u003c\/li\u003e\n\u003cli\u003eReinforce the interior with \u003cstrong\u003efiberglass resin\u003c\/strong\u003e after assembly\u003c\/li\u003e\n\u003cli\u003eFiberglass cloth can be added for maximum strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish Recommendations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSand progressively from \u003cstrong\u003e120 → 220 → 400 grit\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply \u003cstrong\u003e3–5 coats of filler primer\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse body filler where needed\u003c\/li\u003e\n\u003cli\u003eWet sand and re-prime until smooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-Oleum Marine Topside\u003c\/strong\u003e is recommended for final paint\u003c\/li\u003e\n\u003cli\u003eAllow full cure before final wet sanding and buffing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eCooling \u0026amp; Water Pickup Notes\u003c\/h3\u003e\n\u003cp\u003eWater pumps are recommended. Water pickups can be drilled through the hull floor and installed using brass tubing. All penetrations should be sealed properly to prevent water intrusion.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003cbr\u003eThis model requires modification, fitting, and tuning during assembly. It is intended for builders with a working understanding of RC boats, electronics installation, and cooling system routing. This is \u003cstrong\u003enot a beginner platform\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42127966634069,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/ChatGPTImageMar14_2026_02_56_59PM.png?v=1773514641"},{"product_id":"tmrc-axopar-45-stl-pack","title":"TMRC Axopar 45 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Axopar 45 — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModern Offshore Crossover Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TMRC Axo 45 brings modern offshore utility styling into the RC world with a clean, aggressive platform designed for both performance and realism.\u003c\/p\u003e\n\u003cp\u003eInspired by modern adventure and offshore crossover boats, the Axo 45 was engineered from the ground up for RC enthusiasts looking for a unique platform that stands apart from traditional center console designs.\u003c\/p\u003e\n\u003cp\u003eThis model features a wide beam, stepped hull design, enclosed pilothouse styling, and a highly detailed deck layout optimized for high-performance RC applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 1078.30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 307.654 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Twin or triple TMRC V3 outboards\u003c\/li\u003e\n\u003cli\u003eCompatible with all TMRC V3 outboard models\u003c\/li\u003e\n\u003cli\u003e3660 water-cooled brushless systems, water-cooled ESC setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModern offshore-inspired design\u003c\/li\u003e\n\u003cli\u003eStepped hull configuration\u003c\/li\u003e\n\u003cli\u003eDetailed deck and cabin layout\u003c\/li\u003e\n\u003cli\u003eOptimized for RC performance applications\u003c\/li\u003e\n\u003cli\u003eLarge-format printable hull sections\u003c\/li\u003e\n\u003cli\u003eHigh-detail scale-inspired appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete hull STL files\u003c\/li\u003e\n\u003cli\u003eDeck components\u003c\/li\u003e\n\u003cli\u003eCabin components\u003c\/li\u003e\n\u003cli\u003eInterior structural components\u003c\/li\u003e\n\u003cli\u003eAssembly files\u003c\/li\u003e\n\u003cli\u003ePrintable RC boat components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and high-stress mounting areas\u003c\/li\u003e\n\u003cli\u003eHeat inserts strongly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42127996125269,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot_2026-05-25_202644.png?v=1779755393"},{"product_id":"screen-shifter-steering-wheel","title":"Screen Shifter Steering Wheel STL","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC SCALE COCKPIT ACCESSORIES — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eShifter, steering wheel, and screen cover. The details that separate serious builds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese small parts take a build from “printed boat” to full-scale replica. Dial in the helm and the whole cockpit reads real.\u003c\/p\u003e\n\u003cp\u003eScale the files to match your hull size before printing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Scale cockpit detail parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to match your hull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest Results:\u003c\/strong\u003e Resin printing for ultra-sharp detail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDM:\u003c\/strong\u003e Works well with a fine layer height and a small nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShifter\u003c\/li\u003e\n\u003cli\u003eSteering wheel\u003c\/li\u003e\n\u003cli\u003eScreen cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Resin (preferred) or PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.1–0.16 mm — fine layers for detail parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.2–0.4 mm recommended on FDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, servos, electronics, or screens included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat or marine electronics manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42128211869781,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/IMG-4582.heic?v=1770343885"},{"product_id":"universal-stand-v-bottom","title":"Universal V-Bottom Stand STL","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC UNIVERSAL V-BOTTOM BOAT STAND — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStable. Clean. Purpose-built.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Universal V-Bottom Stand properly supports your RC hull during display, maintenance, transport, or storage. Engineered specifically for V-bottom hulls, it cradles the hull evenly to reduce pressure points and stop rocking or tipping while you work on the build.\u003c\/p\u003e\n\u003cp\u003eWhether you're wiring electronics, installing hardware, or showcasing a finished model, this is the professional way to support it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Universal V-bottom boat stand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e V-bottom RC boats, center console hulls, offshore and sportfish-style builds, TMRC models and similar hull types\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale proportionally — measure your beam and adjust for a balanced fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal V-Bottom Boat Stand STL file(s)\u003c\/li\u003e\n\u003cli\u003eInstant download after purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required in most orientations\u003c\/li\u003e\n\u003cli\u003eIncrease infill in the cradle arms when supporting a heavy or fully built hull\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePETG is recommended if the stand will see heat — a car trunk or direct sunlight.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical stand, hull, hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42128954982485,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/stand.png?v=1770397307"},{"product_id":"riptide-28-lightweight-flats-ripper-stl-pack","title":"Riptide 28 — Lightweight Flats Ripper (STL Pack)","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRiptide 28 — Lightweight Flats Ripper (STL Pack)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e714mm Length • 241mm Beam • 3548 Direct Bolt-On\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Riptide 28 is a purpose-built lightweight flats hull engineered for performance-focused builders. At 714mm long with a 241mm beam, this platform delivers a balanced, aggressive stance designed to stay nimble and efficient on the water.\u003c\/p\u003e\n\u003cp\u003eBuilt specifically around the \u003cstrong\u003eTMRC 3548 Outboards\u003c\/strong\u003e with a \u003cstrong\u003edirect bolt-on transom fitment\u003c\/strong\u003e — no adapters required.\u003c\/p\u003e\n\u003cp\u003eThis model is designed for \u003cstrong\u003eexperienced builders\u003c\/strong\u003e who understand power-to-weight tuning, electronics setup, and precision assembly. It is not a beginner platform.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 714 mm (28.1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 241 mm (9.48\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e TMRC 3548 outboards (direct bolt-on)\u003c\/li\u003e\n\u003cli\u003eLightweight performance hull\u003c\/li\u003e\n\u003cli\u003eModular FDM-optimized print sections\u003c\/li\u003e\n\u003cli\u003eClean alignment features for precise assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRiptide 28 hull STL files\u003c\/li\u003e\n\u003cli\u003eModular print sections\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on 3548 transom geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42136390238293,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/ChatGPTImageFeb10_2026_07_48_13PM.png?v=1770770901"},{"product_id":"yeti-cooler-stl","title":"Yeti Cooler STL","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSCALE DECK COOLER — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDeck dressing that makes the whole build read real.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA scale YETI-style deck cooler designed to add realism and character to any TMRC center console setup. Perfect for deck dressing, photography, and display — whether you're building a workboat look or a clean weekend rig.\u003c\/p\u003e\n\u003cp\u003eWorks as a universal accessory for most RC deck layouts: cockpit, bow area, or beside a leaning post. Paintable and easy to customize — strap it down, add decals, weather it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Scale deck cooler accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scales up or down for multiple boat sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeometry:\u003c\/strong\u003e Clean and simple for reliable printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest Results:\u003c\/strong\u003e Resin for crisp edges and fine detail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM and resin 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Scale deck cooler STL file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Resin (preferred) or PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.16–0.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required — print flat on the bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003ePaints cleanly. Add decals, straps, or weathering to match the rest of your deck.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical cooler, hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is an aftermarket scale accessory. “YETI” is a trademark of its respective owner, referenced only to describe style and fit; this product is \u003cstrong\u003enot affiliated with, endorsed by, or sponsored by\u003c\/strong\u003e that brand.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42138487881813,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-02-11180829.png?v=1770851373"},{"product_id":"fishing-chair-stl","title":"Fishing Chair STL","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFISHING CHAIR — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTournament-style offshore presence for your sportfisher cockpit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd next-level realism to your Sport Fisher build with this highly detailed fighting chair. Designed to complement the TMRC Sport Fisher platform, it brings true offshore scale presence to the cockpit.\u003c\/p\u003e\n\u003cp\u003eFrom the wide armrests to the integrated footrest and pedestal base, every angle is modeled with clean geometry and sharp detail. This isn't a generic seat — it's built to look right on a tournament-style sport fisher.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Scale fighting chair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail:\u003c\/strong\u003e Integrated footrest, armrest structure, and pedestal base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs With:\u003c\/strong\u003e TMRC Sport Fisher build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to match your build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM and resin 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Fishing Chair STL file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Resin (preferred for ultra-detail) or PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.1–0.16 mm — fine layers for detail parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill in the pedestal base if the chair will be handled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical chair, hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42143315787861,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/ChatGPTImageFeb13_2026_12_51_44PM.png?v=1771005142"},{"product_id":"tmrc-vector-30-stl-pack","title":"TMRC Vector 30 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Vector 30 — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTwin 3660 Cabin Cruiser\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA compact, aggressive cabin cruiser engineered from the ground up around the \u003cstrong\u003eTMRC 3660 outboard platform\u003c\/strong\u003e. No guesswork. No retrofitting. This hull, transom, and motor spacing are designed to work \u003cstrong\u003eas a system\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eSharp lines. Wide stance. Twin power.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 30” print-optimized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Twin TMRC 3660 outboards\u003c\/li\u003e\n\u003cli\u003eCorrect motor spacing, alignment, and reinforced transom geometry\u003c\/li\u003e\n\u003cli\u003eModern cabin \/ hardtop profile with offshore attitude\u003c\/li\u003e\n\u003cli\u003ePrint-first engineering for clean assembly and strong final builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e30” print-optimized hull\u003c\/li\u003e\n\u003cli\u003eDeck + interior structure\u003c\/li\u003e\n\u003cli\u003eCabin \/ roof assembly\u003c\/li\u003e\n\u003cli\u003eTwin TMRC 3660 outboard-ready transom\u003c\/li\u003e\n\u003cli\u003eModular parts for easier printing, sanding, and paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBuilt For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTMRC 3660 outboard motors\u003c\/li\u003e\n\u003cli\u003eTwin-motor performance setups\u003c\/li\u003e\n\u003cli\u003eDark, stealth, or wrapped finishes\u003c\/li\u003e\n\u003cli\u003eBuilders who want it to look right and run right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003cbr\u003eDesigned to pair with \u003cstrong\u003eTMRC 3660 outboard hardware kits\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42162530222165,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/ChatGPTImageFeb19_2026_11_46_06PM.png?v=1771562797"},{"product_id":"tmrc-seavee-322z-stl-pack","title":"TMRC SeaVee 322Z STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e The TMRC SeaVee 322Z pack is a 3D printable RC center console inspired by the proportions and stance of the SeaVee 322Z. It prints in modular sections, takes a twin outboard setup, and is built to run on the water, not just sit on a shelf.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_SeaVee_322Z_Build_Guide.pdf?v=1793587096\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv style=\"border:1px solid #d0d7de;border-radius:8px;padding:12px 16px;margin:16px 0;\"\u003e\n\u003ch3 style=\"margin-top:0;\"\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 39.9 in long × 13.4 in beam (1013 × 340 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 250 × 250 mm printers (Bambu Lab P1S, X1C, P2S and similar) with the split version. A full-size version is also included for large-format printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e twin outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild guide included:\u003c\/strong\u003e step-by-step PDF with parts lists and exploded views.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat only.\u003c\/strong\u003e Outboards and drive hardware sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThis is not a scan. This is not a drop-in shell. Every surface, seam, and structural decision is made to \u003cstrong\u003eprint clean, assemble correctly, and perform on the water\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Type:\u003c\/strong\u003e Offshore center console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 39.9 in (1013 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 13.4 in (340 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e about 14.7 in (373 mm), keel to hardtop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Twin outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e 42 STL parts (split version) or 20 STL parts (full-size version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e STL files, instant digital download\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDesign Intent\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOffshore-inspired center console geometry\u003c\/li\u003e\n\u003cli\u003eWide, planted stance with sharp bow entry\u003c\/li\u003e\n\u003cli\u003ePrint-optimized hull structure for strength and rigidity\u003c\/li\u003e\n\u003cli\u003eClean deck layout with realistic console proportions\u003c\/li\u003e\n\u003cli\u003eDesigned for a \u003cstrong\u003etwin outboard configuration\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBalanced for scale realism and RC performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint-optimized hull sections\u003c\/li\u003e\n\u003cli\u003eDeck and cockpit structure\u003c\/li\u003e\n\u003cli\u003eCenter console with dash geometry\u003c\/li\u003e\n\u003cli\u003eSeating and interior components\u003c\/li\u003e\n\u003cli\u003eT-top \/ hardtop structure\u003c\/li\u003e\n\u003cli\u003eTransom geometry designed for RC outboards\u003c\/li\u003e\n\u003cli\u003eModular parts for easier printing, sanding, and paint\u003c\/li\u003e\n\u003cli\u003eRecommended print settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild guide (PDF):\u003c\/strong\u003e print settings, parts lists, exploded views and step-by-step assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version (42 parts):\u003c\/strong\u003e every part fits a \u003cstrong\u003e250 × 250 mm build plate\u003c\/strong\u003e, so it prints on the Bambu Lab P1S, X1C, P2S and similar. The hull comes in 12 pieces that glue together in left and right pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-size version (20 parts):\u003c\/strong\u003e the hull comes in 3 large pieces for large-format printers (about 355 × 355 mm bed, 355 mm build height).\u003c\/li\u003e\n\u003cli\u003ePrint one version, not both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat You Need to Finish It\u003c\/h3\u003e\n\u003cp\u003eThis pack is the boat only. Outboards and drive hardware are sold separately: see the \u003ca href=\"\/collections\/outboard-motors-stl\"\u003eTMRC outboard STL files\u003c\/a\u003e and the \u003ca href=\"\/collections\/motor-kits\"\u003ecomplete motor kits\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBuilt For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSerious RC boat builders\u003c\/li\u003e\n\u003cli\u003eClean center console builds\u003c\/li\u003e\n\u003cli\u003eScale-accurate display or runner setups\u003c\/li\u003e\n\u003cli\u003ePainted, wrapped, or custom-finished boats\u003c\/li\u003e\n\u003cli\u003eBuilders who want it to look right and run right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDISCLAIMER\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42162615025749,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/download_2d5a32a6-aaa2-49b5-9980-490afc37c073.jpg?v=1794968856"},{"product_id":"tmrc-victory-46","title":"TMRC Victory 46 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_Victory_46_Build_Guide.pdf?v=1793671322\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild guide included.\u003c\/strong\u003e Every purchase comes with the TMRC Victory 46 Build Guide (PDF): parts list, print settings and step-by-step assembly.\u003c\/p\u003e\n\u003ch2\u003eTMRC Victory 46 — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eV46 Offshore Center Console\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe V46 is one of the most aggressive offshore center console models ever released by TMRC.\u003c\/p\u003e\n\u003cp\u003eDesigned for serious builders and performance enthusiasts, this model combines scale realism, structural strength, and high-performance propulsion capability into one complete printable platform.\u003c\/p\u003e\n\u003cp\u003eThis is a large-format premium STL release intended for experienced RC boat builders. This is not a shelf toy — it is a serious RC performance hull.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox Length:\u003c\/strong\u003e ~46 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 12.8 in (326 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to hardtop):\u003c\/strong\u003e 11.0 in (279 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Multi-motor capability — twin, triple or quad outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e 17 STL files (3-piece hull)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinter:\u003c\/strong\u003e Large format, about 330 × 330 mm bed (hull pieces print standing up, about 375 mm tall)\u003c\/li\u003e\n\u003cli\u003eReinforced running surface geometry\u003c\/li\u003e\n\u003cli\u003eHeavy power system compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull V46 hull STL package (Hull A, B, C)\u003c\/li\u003e\n\u003cli\u003eDeck + interior components (floors, console, windshield, helm and bow seating)\u003c\/li\u003e\n\u003cli\u003eRollbar, hardtop + radar top\u003c\/li\u003e\n\u003cli\u003eTransom engine bracket\u003c\/li\u003e\n\u003cli\u003eTMRC Victory 46 Build Guide (PDF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBuilder Level\u003c\/h3\u003e\n\u003cp\u003eTMRC boats are designed to be simple and logical to assemble, but they do require:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRC boat knowledge\u003c\/li\u003e\n\u003cli\u003eElectronics installation understanding\u003c\/li\u003e\n\u003cli\u003eStructural bonding \/ reinforcement experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are new to RC building, this is not a beginner file.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Pass Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEarly access to new releases\u003c\/li\u003e\n\u003cli\u003eLifetime 40% discount\u003c\/li\u003e\n\u003cli\u003eMonthly STL releases\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003cbr\u003eBuilder assumes all responsibility for electronics selection and assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, sponsored by, or licensed by Valhalla Boatworks or Viking Yacht Company\u003c\/strong\u003e, nor is it an official replica of the Valhalla V-46. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42202202079317,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/download_3fd8bc6c-c28a-4fe6-8d54-83aaf5ba7dbb.jpg?v=1795211788"},{"product_id":"tmrc-freedom-56-stl-pack","title":"TMRC Freedom 56 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e The TMRC Freedom 56 is a 54.9 in (1395 mm), 1\/12 scale 3D printable RC offshore catamaran built for quad TMRC 3660 outboards. The pack includes a full-size version for large-format printers and a split version for standard 250 × 250 mm build plates.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_Freedom_56_Build_Guide_b9f809c3-17ad-4c6b-9241-dd0b41a7c8a8.pdf?v=1793719394\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOne of the largest offshore catamaran STL platforms ever released by TMRC. Built for serious builders looking to create a true statement-level RC performance platform.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 1\/12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 54.9 in (1395 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 16.6 in (421 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to top of tower):\u003c\/strong\u003e 26.8 in (680 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Type:\u003c\/strong\u003e Offshore catamaran\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Engineered for quad TMRC 3660 outboard configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e 28 STL parts (full-size version) · 41 STL parts (split version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer (full-size version):\u003c\/strong\u003e about 420 × 420 mm bed, 375 mm build height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer (split version):\u003c\/strong\u003e 250 × 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003eOptimized for easy assembly while maintaining strength and accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Freedom 56 STL package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-size version\u003c\/strong\u003e (4-piece hull) for large-format printers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version\u003c\/strong\u003e (16-piece hull with centering pins) for standard 250 × 250 mm printers\u003c\/li\u003e\n\u003cli\u003eDetailed deck, console, hardtop and tower components\u003c\/li\u003e\n\u003cli\u003eQuad outboard mounting bracket\u003c\/li\u003e\n\u003cli\u003eTMRC performance-ready hull geometry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild guide (PDF):\u003c\/strong\u003e print settings, parts lists, exploded views and step-by-step assembly for both versions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth versions are included with your purchase at no additional cost.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e every hull piece fits a 250 × 250 mm build plate (Bambu Lab P1S, X1C, P2S and similar). A few flat or non-structural parts (the floor panels, Console A2, Top B, Tower A and the bracket) are slightly longer than 250 mm: split them down the middle in your slicer, print both halves and glue them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-size version:\u003c\/strong\u003e the hull comes in 4 large pieces for large-format printers (about 420 × 420 mm bed, 375 mm build height).\u003c\/li\u003e\n\u003cli\u003ePrint one version, not both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat You Need to Finish It\u003c\/h3\u003e\n\u003cp\u003eThis pack is the boat only. It is engineered for four TMRC 3660 outboards, sold separately: see the \u003ca href=\"\/collections\/outboard-motors-stl\"\u003eTMRC outboard STL files\u003c\/a\u003e and the \u003ca href=\"\/products\/tmrc-complete-drive-system\"\u003eTMRC Complete Drive System\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNote on Proportions\u003c\/h3\u003e\n\u003cp\u003eDue to limited publicly available specifications, some proportions and details reflect TMRC's own design interpretation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDISCLAIMER\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Freeman Boatworks or any real-world boat manufacturer\u003c\/strong\u003e. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42240090439765,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/hf_20261102_230925_21ef091b-5b15-4397-96d8-161a6baf2237.png?v=1793661489"},{"product_id":"yellow-fin-tower-console-upgrade","title":"Yellow Fin Tower Console Upgrade","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eYELLOWFIN TOWER \u0026amp; CONSOLE REDESIGN — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA full scratch build. Not a revision — a ground-up redesign.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe official TMRC Yellowfin Tower \u0026amp; Console Redesign is a completely scratch-built update developed from the ground up by the Tremendous Marine RC team.\u003c\/p\u003e\n\u003cp\u003eThis is a full redesign focused on scale realism, improved assembly, better proportions, and functional scale features that elevate the whole build. Multiple new components and refinements deliver a cleaner, more premium, more accurate final model.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Tower and console upgrade pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadar Housing:\u003c\/strong\u003e Functional — accepts a micro servo for spinning radar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutriggers:\u003c\/strong\u003e Complete set of four scale outriggers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutboard Bracket:\u003c\/strong\u003e Updated quad mounting bracket with correct motor spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully redesigned scale tower structure\u003c\/li\u003e\n\u003cli\u003eBrand-new console system with updated detailing and proportions\u003c\/li\u003e\n\u003cli\u003eFunctional radar housing (micro servo compatible)\u003c\/li\u003e\n\u003cli\u003eFour scale outriggers\u003c\/li\u003e\n\u003cli\u003eAntenna mounts and scale accessories\u003c\/li\u003e\n\u003cli\u003eUpdated quad outboard mounting bracket\u003c\/li\u003e\n\u003cli\u003eImproved part separation for easier printing and faster assembly\u003c\/li\u003e\n\u003cli\u003eRefined tolerances and fitment improvements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 100% — towers and rollbars are printed solid for full strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.16–0.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Pass\u003c\/h3\u003e\n\u003cp\u003eIncluded free with a TMRC Digital Pass membership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, servos, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42264790728789,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot_2026-03-20_120114.png?v=1774022501"},{"product_id":"tmrc-contender-44st-stl-pack","title":"TMRC Contender 44ST STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_Contender_44ST_Build_Guide.pdf?v=1793667248\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Contender 44ST — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1\/12 Scale • 45.6” Hull • Quad Motor Offshore Center Console\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTake your RC offshore builds to the next level with the TMRC Contender 44 ST, a massive 1\/12 scale center console with a 45.6-inch hull, engineered for builders who demand detail, performance, and presence.\u003c\/p\u003e\n\u003cp\u003eDesigned from the ground up as an original TMRC platform inspired by modern offshore center consoles, this model combines aggressive styling with a highly detailed, fully printable design that is ready to become the centerpiece of any RC fleet.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 1\/12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 45.6 in (1159 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with Outboards:\u003c\/strong\u003e 50.0 in (1271 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 12.8 in (326 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to T-top):\u003c\/strong\u003e 13.6 in (346 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Quad TMRC outboard configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e 33 STL parts (large format edition) · 50 STL parts (split edition)\u003c\/li\u003e\n\u003cli\u003eHighly detailed full tower assembly\u003c\/li\u003e\n\u003cli\u003eRealistic deck, console, and interior details\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer (large format edition):\u003c\/strong\u003e about 380 × 380 mm bed, 360 mm build height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer build volume (split edition):\u003c\/strong\u003e 250 × 250 mm\u003c\/li\u003e\n\u003cli\u003eEstimated filament usage: up to approximately 10 kg for a complete build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge Format Edition\u003c\/strong\u003e — 4-piece hull, larger sections, fewer seams, faster assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit Edition\u003c\/strong\u003e — 16-piece hull with alignment pins, optimized for standard 250 × 250 mm printers\u003c\/li\u003e\n\u003cli\u003eFull tower assembly\u003c\/li\u003e\n\u003cli\u003eDeck, console and interior components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild guide (PDF):\u003c\/strong\u003e print settings, parts lists, exploded views and step-by-step assembly for both editions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth file packs are included with your purchase at no additional cost.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Size\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit edition:\u003c\/strong\u003e every hull piece fits a 250 × 250 mm build plate. A couple of non-structural parts (Gunnels A and the rails) are slightly longer than 250 mm: split them in your slicer, print both halves and glue them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge format edition:\u003c\/strong\u003e the hull comes in 4 large pieces for printers with about a 380 × 380 mm bed and 360 mm build height.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb or Cubic equivalent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop \/ Bottom Layers:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePerfect For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRC offshore enthusiasts and advanced builders\u003c\/li\u003e\n\u003cli\u003eLarge scale display models\u003c\/li\u003e\n\u003cli\u003eHigh-performance quad motor builds\u003c\/li\u003e\n\u003cli\u003eCollectors and TMRC Digital Pass members\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, sharing, or selling completed boats produced from these files is strictly prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Contender Boats or any real-world boat manufacturer\u003c\/strong\u003e. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42420239302741,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/hf_20261103_012057_7151322c-bac6-4f1d-bcc9-cf87acaaf1e3.png?v=1793668947"},{"product_id":"tmrc-lynx-36-cat-stl-pack","title":"TMRC Lynx 36 Cat STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Lynx 36 Cat — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e36” Twin Motor Performance Catamaran\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Lynx 36 Cat is a 36-inch twin-hull design engineered around a \u003cstrong\u003etwin motor setup\u003c\/strong\u003e with a \u003cstrong\u003edirect bolt-on configuration for the TMRC 3660 V3 outboards\u003c\/strong\u003e. Designed to be efficient, stable, and aggressive on the water while keeping the build streamlined.\u003c\/p\u003e\n\u003cp\u003eThis is a purpose-built platform — not a basic file.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Type:\u003c\/strong\u003e Catamaran (twin hull)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Twin motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Direct bolt-on for TMRC V3 outboards\u003c\/li\u003e\n\u003cli\u003e250 × 250 mm printer version included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete STL file package\u003c\/li\u003e\n\u003cli\u003eSectioned hull for printing\u003c\/li\u003e\n\u003cli\u003eDeck + structural components\u003c\/li\u003e\n\u003cli\u003eAll updates included until final release\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBuild Level\u003c\/h3\u003e\n\u003cp\u003eNot beginner-friendly. Designed for twin motor performance setups, builders with RC experience, and users comfortable with tuning and setup.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePre-Order Notice\u003c\/h3\u003e\n\u003cp\u003eThis is a developing platform. Design and performance may be refined prior to final release.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42469910937685,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}]},{"product_id":"tmrc-merc-300x-v3-outboard-stl-pack","title":"TMRC Merc 300X V3 Outboard — STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC MERC 300X V3 OUTBOARD — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt on the TMRC 3660 V3 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe next evolution of the TMRC outboard lineup. The Merc 300x V3 is built on the TMRC 3660 V3 platform and designed specifically around the proven TFL lower unit setup.\u003c\/p\u003e\n\u003cp\u003eThis version features a redesigned mounting structure for improved rigidity, cleaner fitment, and better long-term durability under high-power setups. Built for serious RC offshore applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 8.9\" (226 mm), skeg to top of cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCowl:\u003c\/strong\u003e 2.8\" wide × 4.7\" long (71 × 119 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 2.8\" (71 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiggest Printed Part:\u003c\/strong\u003e Cowl, 119 mm on its longest side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 3660 brushless water-cooled setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Compatibility:\u003c\/strong\u003e TFL lower unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Shaft:\u003c\/strong\u003e 44.3 mm, 4 mm stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Mounting Hardware:\u003c\/strong\u003e 25 mm M2 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering \/ Swivel Bolt:\u003c\/strong\u003e M3 × 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMerc 300x V3 cowling\u003c\/li\u003e\n\u003cli\u003eUpdated V3 midsection\u003c\/li\u003e\n\u003cli\u003eSwivel bracket components\u003c\/li\u003e\n\u003cli\u003eMounting hardware locations integrated into the design\u003c\/li\u003e\n\u003cli\u003eTrim-compatible architecture\u003c\/li\u003e\n\u003cli\u003eSTL files for 3D printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-V3-Outboard-Build-Guide.pdf?v=1794092773\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ASA \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Heat inserts strongly recommended\u003c\/li\u003e\n\u003cli\u003eIncrease infill around high-stress mounting areas on aggressive setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cp\u003eThese parts are not printable and must be sourced separately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3660 Brushless Motor (2150KV)\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/3OrRagp\" rel=\"noopener\" target=\"_blank\"\u003eBuy on Amazon\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit — TFL B54210 H-KIT-E\u003c\/strong\u003e — \u003ca href=\"https:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\" rel=\"noopener\" target=\"_blank\"\u003eTFL North America\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 mm Stainless Steel Drive Shaft\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/4q64TGN\" rel=\"noopener\" target=\"_blank\"\u003eBuy on Amazon\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eRequired exposed length: 21.34 mm ± 0.5 mm\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastic Shaft Coupler (5 mm → 4 mm)\u003c\/strong\u003e — \u003ca href=\"https:\/\/a.aliexpress.com\/_msaWfy5\" rel=\"noopener\" target=\"_blank\"\u003eBuy on AliExpress\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Motor Mount Screw (Optional)\u003c\/strong\u003e — \u003ca href=\"https:\/\/www.mcmaster.com\/91273A349\/\" rel=\"noopener\" target=\"_blank\"\u003eMcMaster-Carr\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eAny standard M3 screw of suitable length may be used\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Video\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/vJ56jMa7Hlc?si=cNOe1XT5LX-_ekv-\" rel=\"noopener\" target=\"_blank\"\u003eWatch the TMRC V3 outboard assembly walkthrough on YouTube\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance RC center consoles\u003c\/li\u003e\n\u003cli\u003eCatamarans\u003c\/li\u003e\n\u003cli\u003eOffshore race builds\u003c\/li\u003e\n\u003cli\u003eTwin and quad outboard setups\u003c\/li\u003e\n\u003cli\u003eScale replica projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. TMRC is not affiliated with Mercury Marine.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42499335127125,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/5eace2921a684b48adc64f4fa54336f4.thumbnail.0000000000.jpg?v=1789519878"},{"product_id":"tmrc-yammy-425-v3","title":"TMRC Yammy 425 V3 Outboard — STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC YAMMY 425 V3 OUTBOARD — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt on the TMRC 3660 V3 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TMRC outboard lineup continues to evolve. The Yammy 425 V3 is a high-performance RC-inspired outboard built on the TMRC 3660 V3 platform and designed around the proven TFL lower unit platform.\u003c\/p\u003e\n\u003cp\u003eThe V3 platform features an upgraded mounting structure for improved rigidity, cleaner fitment, and increased durability under aggressive offshore setups. Built for serious RC performance applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9.2\" (233 mm), skeg to top of cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCowl:\u003c\/strong\u003e 2.9\" wide × 4.8\" long (74 × 121 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 2.9\" (75 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiggest Printed Part:\u003c\/strong\u003e Midsection, 122 mm on its longest side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 3660 brushless water-cooled setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Compatibility:\u003c\/strong\u003e TFL lower unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Shaft:\u003c\/strong\u003e 4 mm stainless — length TBD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Mounting Hardware:\u003c\/strong\u003e 25 mm M2 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering \/ Swivel Bolt:\u003c\/strong\u003e M3 × 65 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYammy 425 V3 cowling\u003c\/li\u003e\n\u003cli\u003eUpdated V3 midsection\u003c\/li\u003e\n\u003cli\u003eSwivel bracket components\u003c\/li\u003e\n\u003cli\u003eMounting hardware locations integrated into the design\u003c\/li\u003e\n\u003cli\u003eTrim-compatible architecture\u003c\/li\u003e\n\u003cli\u003eSTL files for 3D printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-V3-Outboard-Build-Guide.pdf?v=1794092773\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ASA \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Heat inserts strongly recommended\u003c\/li\u003e\n\u003cli\u003eIncrease infill around high-stress mounting areas on aggressive setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cp\u003eThese parts are not printable and must be sourced separately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3660 Brushless Motor (2150KV)\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/3OrRagp\" rel=\"noopener\" target=\"_blank\"\u003eBuy on Amazon\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit — TFL B54210 H-KIT-E\u003c\/strong\u003e — \u003ca href=\"https:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\" rel=\"noopener\" target=\"_blank\"\u003eTFL North America\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 mm Stainless Steel Drive Shaft\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/4q64TGN\" rel=\"noopener\" target=\"_blank\"\u003eBuy on Amazon\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eRequired exposed length: 21.34 mm ± 0.5 mm\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastic Shaft Coupler (5 mm → 4 mm)\u003c\/strong\u003e — \u003ca href=\"https:\/\/a.aliexpress.com\/_msaWfy5\" rel=\"noopener\" target=\"_blank\"\u003eBuy on AliExpress\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Motor Mount Screw (Optional)\u003c\/strong\u003e — \u003ca href=\"https:\/\/www.mcmaster.com\/91273A349\/\" rel=\"noopener\" target=\"_blank\"\u003eMcMaster-Carr\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eAny standard M3 screw of suitable length may be used\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Video\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/vJ56jMa7Hlc?si=cNOe1XT5LX-_ekv-\" rel=\"noopener\" target=\"_blank\"\u003eWatch the TMRC V3 outboard assembly walkthrough on YouTube\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance RC center consoles\u003c\/li\u003e\n\u003cli\u003eCatamarans\u003c\/li\u003e\n\u003cli\u003eOffshore race builds\u003c\/li\u003e\n\u003cli\u003eTwin and quad outboard setups\u003c\/li\u003e\n\u003cli\u003eScale replica projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. TMRC is not affiliated with Yamaha Motor Company.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42511078948949,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/348f19c3873249689c92bb1bb92791e6.thumbnail.0000000000.jpg?v=1789519873"},{"product_id":"tmrc-merc-pro-400-v3-outboard-stl-pack","title":"TMRC Merc Pro 400 V3 Outboard — STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical motor.\u003c\/strong\u003e The TMRC Merc Pro 400 V3 is a 3D printable RC outboard: cowling, V3 midsection and swivel bracket, built on the TMRC 3660 V3 platform and designed around a 3660 water-cooled brushless motor and the proven TFL lower unit setup.\u003c\/p\u003e\n\u003cp\u003eThis version features a redesigned mounting structure for improved rigidity, cleaner fitment, and better long-term durability under high-power setups. Built for serious RC offshore applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e TMRC 3660 V3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9.5\" (241 mm), skeg to top of cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCowl:\u003c\/strong\u003e 2.5\" wide × 4.9\" long (64 × 125 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 2.5\" (64 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiggest Printed Part:\u003c\/strong\u003e Cowl, 125 mm on its longest side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 3660 brushless water-cooled setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Compatibility:\u003c\/strong\u003e TFL lower unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Shaft:\u003c\/strong\u003e 44.3 mm, 4 mm stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Mounting Hardware:\u003c\/strong\u003e 55 mm M2 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering \/ Swivel Bolt:\u003c\/strong\u003e M3 × 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMerc Pro 400 V3 cowling\u003c\/li\u003e\n\u003cli\u003eUpdated V3 midsection\u003c\/li\u003e\n\u003cli\u003eSwivel bracket components\u003c\/li\u003e\n\u003cli\u003eMounting hardware locations integrated into the design\u003c\/li\u003e\n\u003cli\u003eTrim-compatible architecture\u003c\/li\u003e\n\u003cli\u003eSTL files for 3D printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-V3-Outboard-Build-Guide.pdf?v=1794092773\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ASA \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Heat inserts strongly recommended\u003c\/li\u003e\n\u003cli\u003eIncrease infill around high-stress mounting areas on aggressive setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cp\u003eThese parts are not printable and must be sourced separately. The \u003ca href=\"\/products\/tmrc-complete-drive-system\"\u003eTMRC Complete Drive System\u003c\/a\u003e bundles the lower unit, motor, couplers and drive shaft in one kit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3660 Brushless Motor (2150KV)\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/3OrRagp\" rel=\"noopener\" target=\"_blank\"\u003eBuy on Amazon\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit — TFL B54210 H-KIT-E\u003c\/strong\u003e — \u003ca href=\"https:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\" rel=\"noopener\" target=\"_blank\"\u003eTFL North America\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 mm Stainless Steel Drive Shaft\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/4q64TGN\" rel=\"noopener\" target=\"_blank\"\u003eBuy on Amazon\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eRequired exposed length: 21.34 mm ± 0.5 mm\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastic Shaft Coupler (5 mm → 4 mm)\u003c\/strong\u003e — \u003ca href=\"https:\/\/a.aliexpress.com\/_msaWfy5\" rel=\"noopener\" target=\"_blank\"\u003eBuy on AliExpress\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Motor Mount Screw (Optional)\u003c\/strong\u003e — \u003ca href=\"https:\/\/www.mcmaster.com\/91273A349\/\" rel=\"noopener\" target=\"_blank\"\u003eMcMaster-Carr\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eAny standard M3 screw of suitable length may be used\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Video\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/vJ56jMa7Hlc?si=cNOe1XT5LX-_ekv-\" rel=\"noopener\" target=\"_blank\"\u003eWatch the TMRC V3 outboard assembly walkthrough on YouTube\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance RC center consoles\u003c\/li\u003e\n\u003cli\u003eCatamarans\u003c\/li\u003e\n\u003cli\u003eOffshore race builds\u003c\/li\u003e\n\u003cli\u003eTwin, triple, quad, and quint outboard setups\u003c\/li\u003e\n\u003cli\u003eScale replica projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDISCLAIMER\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. TMRC is not affiliated with Mercury Marine.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42527410389077,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot_2026-05-25_185151.png?v=1779749553"},{"product_id":"tmrc-defender-26-stl-pack","title":"TMRC Defender 26 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Defender 26 — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOffshore Center Console • Single or Twin Outboard\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInspired by the aggressive styling and functionality of modern offshore center consoles, the Defender 26 was designed from the ground up to deliver a clean scale appearance, excellent performance potential, and a highly detailed platform for RC boating enthusiasts.\u003c\/p\u003e\n\u003cp\u003eThis model has been optimized for high-performance single or twin outboard configurations while maintaining a realistic offshore look and stable hull design.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Single or twin outboard\u003c\/li\u003e\n\u003cli\u003eOptimized split sections for large-format printing\u003c\/li\u003e\n\u003cli\u003eOptimized primarily for the Anycubic Kobra 3 Max\u003c\/li\u003e\n\u003cli\u003eCan also be printed on smaller printers using split components\u003c\/li\u003e\n\u003cli\u003eEstimated filament usage: approximately 10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Defender 26 hull STL files\u003c\/li\u003e\n\u003cli\u003eDeck and interior components\u003c\/li\u003e\n\u003cli\u003eConsole and seating components\u003c\/li\u003e\n\u003cli\u003eHardtop components\u003c\/li\u003e\n\u003cli\u003eOutboard mounting setup\u003c\/li\u003e\n\u003cli\u003eDetailed assembly-ready parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003cli\u003eHeat inserts strongly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRC offshore boating and scale replica projects\u003c\/li\u003e\n\u003cli\u003eSingle and twin outboard setups\u003c\/li\u003e\n\u003cli\u003eHigh-detail display builds\u003c\/li\u003e\n\u003cli\u003eCustom paint and electronics installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42527620202581,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot_2026-06-23_191831.png?v=1782257093"},{"product_id":"tmrc-verado-350-v3-outboard-stl-pack","title":"TMRC Verado 350 V3 Outboard — STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC VERADO 350 V3 OUTBOARD — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDirect bolt-on upgrade for the TMRC 3660 V3 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe next evolution of the TMRC outboard lineup. The Verado 350 V3 is engineered as a direct bolt-on upgrade for the TMRC 3660 V3 platform and designed specifically around the proven TFL lower unit setup.\u003c\/p\u003e\n\u003cp\u003eThis version features a redesigned mounting structure for improved rigidity, cleaner fitment, and better long-term durability under high-power setups. Built for serious RC offshore applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9.3\" (237 mm), skeg to top of cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCowl:\u003c\/strong\u003e 2.9\" wide × 4.6\" long (73 × 116 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 2.9\" (73 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiggest Printed Part:\u003c\/strong\u003e Midsection, 117 mm on its longest side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 3660 brushless water-cooled setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Compatibility:\u003c\/strong\u003e TFL lower unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Shaft:\u003c\/strong\u003e 4 mm stainless — final length TBD, published after testing and validation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Mounting Hardware:\u003c\/strong\u003e 55 mm M2 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering \/ Swivel Bolt:\u003c\/strong\u003e M3 × 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerado 350 V3 cowling\u003c\/li\u003e\n\u003cli\u003eUpdated V3 midsection\u003c\/li\u003e\n\u003cli\u003eSwivel bracket components\u003c\/li\u003e\n\u003cli\u003eMounting hardware locations integrated into the design\u003c\/li\u003e\n\u003cli\u003eTrim-compatible architecture\u003c\/li\u003e\n\u003cli\u003eSTL files for 3D printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-V3-Outboard-Build-Guide.pdf?v=1794092773\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ASA \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Heat inserts strongly recommended\u003c\/li\u003e\n\u003cli\u003eIncrease infill around high-stress mounting areas on aggressive setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cp\u003eThese parts are not printable and must be sourced separately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3660 Brushless Motor (2150KV)\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/3OrRagp\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/3OrRagp\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit — TFL B54210 H-KIT-E\u003c\/strong\u003e — \u003ca href=\"https:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 mm Stainless Steel Drive Shaft\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/4q64TGN\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/4q64TGN\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eLength to be determined upon final testing\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastic Shaft Coupler (5 mm → 4 mm)\u003c\/strong\u003e — \u003ca href=\"https:\/\/a.aliexpress.com\/_msaWfy5\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/a.aliexpress.com\/_msaWfy5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Motor Mount Screw (Optional)\u003c\/strong\u003e — \u003ca href=\"https:\/\/www.mcmaster.com\/91273A349\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/www.mcmaster.com\/91273A349\/\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eAny standard M3 screw of suitable length may be used\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Video\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/vJ56jMa7Hlc?si=cNOe1XT5LX-_ekv-\" rel=\"noopener\" target=\"_blank\"\u003eWatch the TMRC V3 outboard assembly walkthrough on YouTube\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance RC center consoles\u003c\/li\u003e\n\u003cli\u003eCatamarans\u003c\/li\u003e\n\u003cli\u003eOffshore race builds\u003c\/li\u003e\n\u003cli\u003eTwin, triple, quad, and quint outboard setups\u003c\/li\u003e\n\u003cli\u003eScale replica projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. TMRC is not affiliated with Mercury Marine.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42643667222613,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-06-24211748.png?v=1782350281"},{"product_id":"tmrc-legacy-30","title":"TMRC Legacy 30 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Legacy 30 — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e30” Single Outboard Center Console\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW AVAILABLE FOR 250 × 250 mm BUILD PLATES.\u003c\/strong\u003e The pack now includes a version segmented for 250 × 250 mm printers alongside the original 290 × 290 mm files.\u003c\/p\u003e\n\u003cp\u003eThe TMRC Legacy 30 is an all-new original center console designed from the ground up by Tremendous Marine RC. Inspired by the clean lines and versatility of modern offshore boats, the Legacy 30 delivers a premium RC platform that's equally at home on the water or on display.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for builders, the model is optimized for \u003cstrong\u003e290 × 290 mm build plates\u003c\/strong\u003e, allowing the major hull sections to be printed without unnecessary splitting — reducing print time and simplifying assembly. A \u003cstrong\u003e250 × 250 mm version\u003c\/strong\u003e is also included for builders with smaller printers.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 30” (762 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Single outboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer build volume:\u003c\/strong\u003e 250 × 250 mm (250 × 250 and 290 × 290 versions included)\u003c\/li\u003e\n\u003cli\u003eHighly detailed deck, console, seating, and hardtop\u003c\/li\u003e\n\u003cli\u003eLightweight yet durable design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eTMRC V3 Compatible\u003c\/h3\u003e\n\u003cp\u003eFully compatible with all current TMRC V3 Outboard Systems:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMercury 300X V3\u003c\/li\u003e\n\u003cli\u003eMercury Pro 400 V3\u003c\/li\u003e\n\u003cli\u003eYamaha 425 V3\u003c\/li\u003e\n\u003cli\u003eSuzuki DF300 V3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Electronics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3660 water-cooled brushless motor\u003c\/li\u003e\n\u003cli\u003e4S LiPo battery\u003c\/li\u003e\n\u003cli\u003eWater-cooled ESC\u003c\/li\u003e\n\u003cli\u003eStandard steering servo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete STL file package — hull, deck, console, hardtop, interior, seating, outboard mount\u003c\/li\u003e\n\u003cli\u003eFiles for both 290 × 290 mm and 250 × 250 mm build plates\u003c\/li\u003e\n\u003cli\u003ePersonal use license\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePre-Order\u003c\/h3\u003e\n\u003cp\u003eThis is a pre-order listing. The Legacy 30 is currently undergoing final print validation and on-water testing. By purchasing today you reserve your copy and receive the complete STL package immediately upon official release.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, sharing, or commercial printing is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42702662828117,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/download_ec05c056-15cd-41e3-9544-bc0cd393391a.jpg?v=1795196342"},{"product_id":"tmrc-42-offshore","title":"TMRC 42 Offshore STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e The TMRC 42 Offshore is a 3D printable RC center console inspired by the 42 Yellowfin, designed from the ground up for RC use. The pack includes a large-format version and a split version for standard 250 × 250 mm build plates, and works with TMRC outboards and hardware.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_42_Offshore_Build_Guide.pdf?v=1793587096\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv style=\"border:1px solid #d0d7de;border-radius:8px;padding:12px 16px;margin:16px 0;\"\u003e\n\u003ch3 style=\"margin-top:0;\"\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 52\" hull, 56.8\" with outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 250 × 250 mm printers (split version) or large-format printers. Both versions included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e quad outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel:\u003c\/strong\u003e intermediate to advanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuide included:\u003c\/strong\u003e parts and exploded view guide (PDF).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat only.\u003c\/strong\u003e Outboards and drive hardware sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eWhether you're building a shelf-quality display model or a high-performance RC boat, this file pack is engineered to provide a detailed and rewarding building experience.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Type:\u003c\/strong\u003e Offshore center console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 52.0″ (1320 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with Outboards:\u003c\/strong\u003e 56.8″ (1443 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 17.8″ (453 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight to Gunnel:\u003c\/strong\u003e 9.8″ (249 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (to top of T-top):\u003c\/strong\u003e 25.4″ (645 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Quad outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e 40 STL parts (large-format version) · 35 STL parts (split version)\u003c\/li\u003e\n\u003cli\u003eHigh-detail scale model designed for RC conversion\u003c\/li\u003e\n\u003cli\u003eCompatible with TMRC hardware and outboard systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer build volume (split version):\u003c\/strong\u003e 250 × 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003eEngineered for strength, detail, and ease of assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-format version\u003c\/strong\u003e — optimized for large-format FDM printers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version\u003c\/strong\u003e — for standard 250 × 250 mm build plates\u003c\/li\u003e\n\u003cli\u003eComplete printable hull\u003c\/li\u003e\n\u003cli\u003eDeck and interior components\u003c\/li\u003e\n\u003cli\u003eConsole and seating\u003c\/li\u003e\n\u003cli\u003eDetailed accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts \u0026amp; exploded view guide (PDF):\u003c\/strong\u003e every part labeled for both versions, plus exploded views showing how the boat goes together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth versions are included with your purchase at no additional cost.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat You Need to Finish It\u003c\/h3\u003e\n\u003cp\u003eThis pack is the boat only. Outboards and drive hardware are sold separately: see the \u003ca href=\"\/collections\/outboard-motors-stl\"\u003eTMRC outboard STL files\u003c\/a\u003e and the \u003ca href=\"\/products\/tmrc-complete-drive-system\"\u003eTMRC Complete Drive System\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBuild Level\u003c\/h3\u003e\n\u003cp\u003eIntermediate to advanced. Recommended for builders with experience assembling large RC boats and 3D-printed projects.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDISCLAIMER\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, sharing, uploading, or commercial use is prohibited without the written permission of Tremendous Marine RC.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Yellowfin Yachts or any real-world boat manufacturer\u003c\/strong\u003e. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42722330312789,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/download_eafd1664-32e3-454e-84e1-85a8ffed4644.jpg?v=1794991946"},{"product_id":"tmrc-yammy-250-v3-outboard-stl-pack","title":"TMRC Yammy 250 V3 Outboard — STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC YAMMY 250 V3 OUTBOARD — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDirect bolt-on upgrade for the TMRC 3660 V3 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe next evolution of the TMRC outboard lineup. The Yammy 250 V3 is engineered as a direct bolt-on upgrade for the TMRC 3660 V3 platform and designed specifically around the proven TFL lower unit setup.\u003c\/p\u003e\n\u003cp\u003eThis version features a redesigned mounting structure for improved rigidity, cleaner fitment, and better long-term durability under high-power setups. Built for serious RC offshore applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9.5\" (242 mm), skeg to top of cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCowl:\u003c\/strong\u003e 2.9\" wide × 4.8\" long (74 × 122 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 2.9\" (74 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiggest Printed Part:\u003c\/strong\u003e Midsection, 123 mm on its longest side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 3660 brushless water-cooled setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Compatibility:\u003c\/strong\u003e TFL lower unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Shaft:\u003c\/strong\u003e 4 mm stainless — length TBD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Mounting Hardware:\u003c\/strong\u003e 25 mm M2 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering \/ Swivel Bolt:\u003c\/strong\u003e M3 × 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYammy 250 V3 cowling\u003c\/li\u003e\n\u003cli\u003eUpdated V3 midsection\u003c\/li\u003e\n\u003cli\u003eSwivel bracket components\u003c\/li\u003e\n\u003cli\u003eMounting hardware locations integrated into the design\u003c\/li\u003e\n\u003cli\u003eTrim-compatible architecture\u003c\/li\u003e\n\u003cli\u003eSTL files for 3D printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-V3-Outboard-Build-Guide.pdf?v=1794092773\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ASA \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Heat inserts strongly recommended\u003c\/li\u003e\n\u003cli\u003eIncrease infill around high-stress mounting areas on aggressive setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cp\u003eThese parts are not printable and must be sourced separately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3660 Brushless Motor (2150KV)\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/3OrRagp\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/3OrRagp\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit — TFL B54210 H-KIT-E\u003c\/strong\u003e — \u003ca href=\"https:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 mm Stainless Steel Drive Shaft\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/4q64TGN\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/4q64TGN\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eLength TBD\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastic Shaft Coupler (5 mm → 4 mm)\u003c\/strong\u003e — \u003ca href=\"https:\/\/a.aliexpress.com\/_msaWfy5\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/a.aliexpress.com\/_msaWfy5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Motor Mount Screw (Optional)\u003c\/strong\u003e — \u003ca href=\"https:\/\/www.mcmaster.com\/91273A349\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/www.mcmaster.com\/91273A349\/\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eAny standard M3 screw of suitable length may be used\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Video\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.instagram.com\/p\/DbCGa96wUpC\/\" rel=\"noopener\" target=\"_blank\"\u003eWatch the TMRC V3 outboard assembly walkthrough on Instagram\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance RC center consoles\u003c\/li\u003e\n\u003cli\u003eCatamarans\u003c\/li\u003e\n\u003cli\u003eOffshore race builds\u003c\/li\u003e\n\u003cli\u003eTwin, triple, quad, and quint outboard setups\u003c\/li\u003e\n\u003cli\u003eScale replica projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. TMRC is not affiliated with Yamaha Motor Corporation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42758742540373,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-07-21183940.png?v=1784673684"},{"product_id":"tmrc-suzuki-df300-v3-outboard-stl-pack","title":"TMRC Suzuki DF300 V3 Outboard — STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC SUZUKI DF300 V3 OUTBOARD — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDirect bolt-on upgrade for the TMRC 3660 V3 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe next evolution of the TMRC outboard lineup. The Suzuki DF300 V3 is engineered as a direct bolt-on upgrade for the TMRC 3660 V3 platform and designed specifically around the proven TFL lower unit setup.\u003c\/p\u003e\n\u003cp\u003eThis version features a redesigned mounting structure for improved rigidity, cleaner fitment, and better long-term durability under high-power setups. Built for serious RC offshore applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 8.9\" (227 mm), skeg to top of cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCowl:\u003c\/strong\u003e 2.9\" wide × 4.7\" long (74 × 119 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 2.9\" (74 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiggest Printed Part:\u003c\/strong\u003e Midsection, 128 mm on its longest side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 3660 brushless water-cooled setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Compatibility:\u003c\/strong\u003e TFL lower unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Shaft:\u003c\/strong\u003e 4 mm stainless — length TBD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Mounting Hardware:\u003c\/strong\u003e 25 mm M2 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering \/ Swivel Bolt:\u003c\/strong\u003e M3 × 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki DF300 V3 cowling\u003c\/li\u003e\n\u003cli\u003eUpdated V3 midsection\u003c\/li\u003e\n\u003cli\u003eSwivel bracket components\u003c\/li\u003e\n\u003cli\u003eMounting hardware locations integrated into the design\u003c\/li\u003e\n\u003cli\u003eTrim-compatible architecture\u003c\/li\u003e\n\u003cli\u003eSTL files for 3D printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-V3-Outboard-Build-Guide.pdf?v=1794092773\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ASA \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Heat inserts strongly recommended\u003c\/li\u003e\n\u003cli\u003eIncrease infill around high-stress mounting areas on aggressive setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cp\u003eThese parts are not printable and must be sourced separately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3660 Brushless Motor (2150KV)\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/3OrRagp\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/3OrRagp\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit — TFL B54210 H-KIT-E\u003c\/strong\u003e — \u003ca href=\"https:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/tflnorthamerica.com\/product\/tfl-b54210-h-kit-e-for-b54210\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 mm Stainless Steel Drive Shaft\u003c\/strong\u003e — \u003ca href=\"https:\/\/amzn.to\/4q64TGN\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/amzn.to\/4q64TGN\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eLength TBD\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastic Shaft Coupler (5 mm → 4 mm)\u003c\/strong\u003e — \u003ca href=\"https:\/\/a.aliexpress.com\/_msaWfy5\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/a.aliexpress.com\/_msaWfy5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Motor Mount Screw (Optional)\u003c\/strong\u003e — \u003ca href=\"https:\/\/www.mcmaster.com\/91273A349\/\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/www.mcmaster.com\/91273A349\/\u003c\/a\u003e\u003cbr\u003e\u003cem\u003eAny standard M3 screw of suitable length may be used\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Video\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.instagram.com\/p\/DbCGa96wUpC\/\" rel=\"noopener\" target=\"_blank\"\u003eWatch the TMRC V3 outboard assembly walkthrough on Instagram\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance RC center consoles\u003c\/li\u003e\n\u003cli\u003eCatamarans\u003c\/li\u003e\n\u003cli\u003eOffshore race builds\u003c\/li\u003e\n\u003cli\u003eTwin, triple, quad, and quint outboard setups\u003c\/li\u003e\n\u003cli\u003eScale replica projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. TMRC is not affiliated with Suzuki Motor Corporation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42758814335061,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-07-21190307.png?v=1784675646"},{"product_id":"yellowfin-42-wall-art-stl-file","title":"Yellowfin 42 Wall Art STL File","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a printed piece.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC YELLOWFIN 42 WALL ART — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOffshore lines on your wall. Print it at any size you like.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBring your passion for offshore boating into your home, office, garage, or workshop with the TMRC Yellowfin 42 Wall Art. Inspired by one of the most iconic center consoles on the water, this sleek silhouette is designed for clean, lightweight 3D printing.\u003c\/p\u003e\n\u003cp\u003eLight enough to hang with double-sided mounting tape, Command™ strips, or small nails. Mounting hardware not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wall art silhouette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to any size that fits your space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Tape, Command™ strips, or small nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TMRC Yellowfin 42 Wall Art STL file\u003c\/li\u003e\n\u003cli\u003eScale to your desired print size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required — print flat on the build plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003ePrints clean straight off the plate. Sand and paint for a premium look, or run it in a contrasting filament for a modern silhouette effect.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical wall art, mounting hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is a fan-inspired artistic wall display created by Tremendous Marine RC and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Yellowfin Yachts or any other boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42780556099669,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/99056770-CEA8-4230-88BE-3301B2B504FF.png?v=1784860888"},{"product_id":"tmrc-defender-26-wall-art-stl-file","title":"TMRC Defender 26 Wall Art STL File","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a printed piece.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC DEFENDER 26 WALL ART — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRugged utility styling on your wall. Print it at any size you like.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBring your passion for offshore boating into your home, office, garage, or workshop with the TMRC Defender 26 Wall Art. Inspired by the rugged utility and unmistakable styling of the Defender 26, this sleek silhouette is designed for clean, lightweight 3D printing.\u003c\/p\u003e\n\u003cp\u003eLight enough to hang with double-sided mounting tape, Command™ strips, or small nails. Mounting hardware not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wall art silhouette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to any size that fits your space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Tape, Command™ strips, or small nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TMRC Defender 26 Wall Art STL file\u003c\/li\u003e\n\u003cli\u003eScale to your desired print size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required — print flat on the build plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003ePrints clean straight off the plate. Sand and paint for a premium look, or run it in a contrasting filament for a modern silhouette effect.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical wall art, mounting hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is a fan-inspired artistic wall display created by Tremendous Marine RC and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42780563734613,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/20DC7709-A365-4679-9859-67286EB3541E.jpg?v=1784936779"},{"product_id":"tmrc-contender-44-wall-art-stl-file","title":"TMRC Contender 44 Wall Art STL File","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a printed piece.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC CONTENDER 44 WALL ART — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAggressive center console lines on your wall. Print it at any size you like.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBring your passion for offshore boating into your home, office, garage, or workshop with the TMRC Contender 44 Wall Art. Inspired by the aggressive lines and unmistakable profile of the Contender 44, this sleek silhouette is designed for clean, lightweight 3D printing.\u003c\/p\u003e\n\u003cp\u003eLight enough to hang with double-sided mounting tape, Command™ strips, or small nails. Mounting hardware not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wall art silhouette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to any size that fits your space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Tape, Command™ strips, or small nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TMRC Contender 44 Wall Art STL file\u003c\/li\u003e\n\u003cli\u003eScale to your desired print size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required — print flat on the build plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003ePrints clean straight off the plate. Sand and paint for a premium look, or run it in a contrasting filament for a modern silhouette effect.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical wall art, mounting hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is a fan-inspired artistic wall display created by Tremendous Marine RC and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Contender Boats or any other boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42784715276373,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/WhatsAppImage2026-07-21at10.43.54PM.jpg?v=1785086203"},{"product_id":"tmrc-sportfisher-front-view-wall-art-stl-file","title":"TMRC Sportfisher Front View Wall Art STL File","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a printed piece.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC SPORTFISHER FRONT VIEW WALL ART — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe bow-on stance of a modern sportfisher. Print it at any size you like.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBring the commanding presence of an offshore sportfishing yacht into your home, office, garage, or workshop. This detailed front-view silhouette captures the aggressive lines, towering profile, and unmistakable presence these legendary boats are known for.\u003c\/p\u003e\n\u003cp\u003eLight enough to hang with double-sided mounting tape, Command™ strips, or small nails. Mounting hardware not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wall art silhouette, front view\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to any size that fits your space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Tape, Command™ strips, or small nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TMRC Sportfisher Front View Wall Art STL file\u003c\/li\u003e\n\u003cli\u003eScale to your desired print size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required — print flat on the build plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003ePrints clean straight off the plate. Sand and paint for a premium look, or run it in a contrasting filament for a modern silhouette effect.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical wall art, mounting hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is a fan-inspired artistic wall display created by Tremendous Marine RC and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Viking Yachts, Hatteras, Spencer, Jarrett Bay, Freeman, or any other boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42784720617557,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/WhatsAppImage2026-07-20at11.34.35PM.jpg?v=1785086551"},{"product_id":"tmrc-sportfisher-side-view-wall-art-stl-file","title":"TMRC Sportfisher Side View Wall Art STL File","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a printed piece.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC SPORTFISHER SIDE VIEW WALL ART — STL FILE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe timeless profile of an offshore sportfisher. Print it at any size you like.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBring the unmistakable silhouette of a modern sportfisher into your home, office, garage, or workshop. This detailed side-view design highlights the sleek hull, towering bridge, outriggers, and powerful stance that define these legendary offshore machines.\u003c\/p\u003e\n\u003cp\u003eLight enough to hang with double-sided mounting tape, Command™ strips, or small nails. Mounting hardware not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wall art silhouette, side view\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to any size that fits your space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Tape, Command™ strips, or small nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TMRC Sportfisher Side View Wall Art STL file\u003c\/li\u003e\n\u003cli\u003eScale to your desired print size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required — print flat on the build plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003ePrints clean straight off the plate. Sand and paint for a premium look, or run it in a contrasting filament for a modern silhouette effect.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical wall art, mounting hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is a fan-inspired artistic wall display created by Tremendous Marine RC and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Viking Yachts, Hatteras, Spencer, Jarrett Bay, Merritt, or any other boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42784721895509,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/side.jpg?v=1785087248"},{"product_id":"tmrc-sportfisher-wall-art-collection-5-pack","title":"TMRC Sportfisher Wall Art Collection (5-Pack)","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a printed piece.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC OFFSHORE WALL ART COLLECTION — 5-PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFive silhouettes. One display wall. All the icons.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBring the world's most recognizable offshore boats into your home, office, garage, or workshop. This collection includes five premium wall art STL files, designed for clean, lightweight 3D printing.\u003c\/p\u003e\n\u003cp\u003ePrint them all at the same size for an impressive display wall, or scale each design to fit its own space. Light enough to hang with double-sided mounting tape, Command™ strips, or small nails. Mounting hardware not included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wall art silhouettes, 5-file collection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale every design to any size you choose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Tape, Command™ strips, or small nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TMRC Contender 44 Wall Art STL file\u003c\/li\u003e\n\u003cli\u003e(1) TMRC Yellowfin 42 Wall Art STL file\u003c\/li\u003e\n\u003cli\u003e(1) TMRC Defender 26 Wall Art STL file\u003c\/li\u003e\n\u003cli\u003e(1) TMRC Sportfisher Front View Wall Art STL file\u003c\/li\u003e\n\u003cli\u003e(1) TMRC Sportfisher Side View Wall Art STL file\u003c\/li\u003e\n\u003cli\u003eAll files scale to your desired print size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Not required — print flat on the build plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish\u003c\/h3\u003e\n\u003cp\u003ePrints clean straight off the plate. Sand and paint for a premium look, or run the set in contrasting filaments for a modern gallery-wall effect.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo physical wall art, mounting hardware, or fasteners included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThese are \u003cstrong\u003edigital STL files\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThese are fan-inspired artistic wall displays created by Tremendous Marine RC and are \u003cstrong\u003enot affiliated with, endorsed by, or associated with Contender Boats, Yellowfin Yachts, Viking Yachts, Hatteras, Spencer, Jarrett Bay, Merritt, Defender, or any other boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42784742309973,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/ChatGPTImageJul26_2026_01_54_00PM.png?v=1785088869"},{"product_id":"tmrc-mangrove-cat-stl-pack","title":"TMRC Mangrove Cat STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC Mangrove Cat — STL Pack\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Motor Catamaran Edition\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuild your own TMRC Mangrove Cat with this professionally designed STL file package. Optimized for FDM 3D printing, this lightweight catamaran features a modular design that's easy to print, assemble, and customize.\u003c\/p\u003e\n\u003cp\u003eDesigned around the \u003cstrong\u003eTMRC V3 Outboard Platform\u003c\/strong\u003e, this model provides a clean, scale installation using any compatible TMRC V3 outboard (sold separately).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 791 mm (31.14 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 294 mm (11.57 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Single motor, TMRC V3 outboard platform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer build volume:\u003c\/strong\u003e 295 × 295 mm\u003c\/li\u003e\n\u003cli\u003eLightweight, modular hull design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete hull and deck STL files\u003c\/li\u003e\n\u003cli\u003eHatch and interior components\u003c\/li\u003e\n\u003cli\u003eTMRC V3 outboard mounting provisions\u003c\/li\u003e\n\u003cli\u003ePrint orientation recommendations\u003c\/li\u003e\n\u003cli\u003eBasic assembly reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrim:\u003c\/strong\u003e Recommended for larger hull sections\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003cbr\u003ePrint quality and fitment may vary depending on your printer, slicer settings, materials, and assembly techniques.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42789092491349,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/download_c378833e-98ee-430d-b61b-e416170bc44c.jpg?v=1795211792"},{"product_id":"tmrc-calypso-36-stl-pack","title":"TMRC Calypso 36 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_Calypso_36_Build_Guide.pdf?v=1793568439\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC CALYPSO 36\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1\/10 scale walkaround sportfish. A 36-foot sportfish brought down to 43 inches.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TMRC Calypso 36 is a 1\/10 scale walkaround sportfish designed from the ground up for RC builders. At 43.3 inches long, twin inboard shaft drives, timeless sportfish styling, and a detailed tuna tower combine scale realism with smooth on-the-water performance.\u003c\/p\u003e\n\u003cp\u003eEqually at home as a display model or a running RC boat, the Calypso 36 is engineered for straightforward assembly and reliable operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 1\/10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 43.3 in (1100 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 13.1 in (332 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to top of tower):\u003c\/strong\u003e 17.7 in (450 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Twin inboard shaft drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Walkaround sportfish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete hull and deck\u003c\/li\u003e\n\u003cli\u003eCabin and tuna tower\u003c\/li\u003e\n\u003cli\u003eInterior components\u003c\/li\u003e\n\u003cli\u003eComplete STL file pack\u003c\/li\u003e\n\u003cli\u003eLarge-format version (26 parts)\u003c\/li\u003e\n\u003cli\u003eSplit version (34 parts) for 250 × 250 mm bed printers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild guide (PDF):\u003c\/strong\u003e print settings, parts lists, exploded views, step-by-step assembly and a bill of materials with parts links\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003eTwo complete file packs are included. Pick the one that fits your printer:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003eMinimum bed\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLarge-format (26 parts)\u003c\/td\u003e\n\u003ctd\u003e360 × 360 mm (e.g. 400 × 400 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplit (34 parts)\u003c\/td\u003e\n\u003ctd\u003e250 × 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42822780977237,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/hf_20261101_211617_bd16dc72-d7b6-4e9f-b962-adaba457bfe8.png?v=1793567842"},{"product_id":"tmrc-freedom-56-pilot-house-stl-pack","title":"TMRC Freedom 56 Pilot House STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_Freedom_56_Pilot_House_Build_Guide.pdf?v=1793720402\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild guide included.\u003c\/strong\u003e Every purchase comes with the TMRC Freedom 56 Pilot House Build Guide (PDF): parts lists, print settings, exploded view and step-by-step assembly.\u003c\/p\u003e\n\u003ch2\u003eTMRC FREEDOM 56 – PILOT HOUSE STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAdd-on package. Pilot house only — requires the Freedom 56 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pilot House Edition transforms the aggressive offshore Freedom 56 into a completely different configuration with a fully enclosed pilot house, while keeping the massive presence and unmistakable profile of the original 56.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically around the existing Freedom 56 platform, this package lets current Freedom 56 owners upgrade their boat without starting a new build from scratch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing includes the pilot house add-on only.\u003c\/strong\u003e If you do not already own the Freedom 56 files, buy the Complete STL Pack instead.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e TMRC Freedom 56 catamaran\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 1\/12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 54.9 in (1395 mm) · 58.6 in (1488 mm) with outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 16.6 in (421 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to top of tower):\u003c\/strong\u003e 29.7 in (754 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot house parts:\u003c\/strong\u003e 16 STL parts (full-size version) · 29 STL parts (split version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Fully enclosed pilot house\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits existing Freedom 56 builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull enclosed pilot house configuration\u003c\/li\u003e\n\u003cli\u003eDetailed scale-inspired exterior components\u003c\/li\u003e\n\u003cli\u003eSplit version for 250 × 250 mm printers\u003c\/li\u003e\n\u003cli\u003eFull tower configuration (tower, upper helm and outriggers)\u003c\/li\u003e\n\u003cli\u003eTMRC Freedom 56 Pilot House Build Guide (PDF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003eA split version is included for printers with a minimum 250 × 250 mm build area.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42926137442389,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/hf_20261103_154256_91310d65-b322-46f9-af34-e11c033a8200.png?v=1793720635"},{"product_id":"tmrc-freedom-56-pilot-house-edition-complete-stl-pack","title":"TMRC Freedom 56 Pilot House Edition — Complete STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_Freedom_56_Pilot_House_Build_Guide.pdf?v=1793720402\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild guide included.\u003c\/strong\u003e Every purchase comes with the TMRC Freedom 56 Pilot House Build Guide (PDF): parts lists, print settings, exploded view and step-by-step assembly.\u003c\/p\u003e\n\u003ch2\u003eTMRC FREEDOM 56 – PILOT HOUSE EDITION | COMPLETE STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe complete 56-inch catamaran. Hull, pilot house, and full tower in one pack.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt roughly 56 inches long in 1\/12 scale, the Freedom 56 is a massive RC catamaran built for people who want serious size, detail, performance, and presence. This package includes the all-new pilot house, the full tower, and a 250 × 250 mm split-print configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the complete package.\u003c\/strong\u003e You do not need to own or buy the original Freedom 56 files separately — everything needed to print the Pilot House Edition from the ground up is included.\u003c\/p\u003e\n\u003cp\u003eBuild it with the clean pilot house configuration or take it all the way with the full tower setup. Both are included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 1\/12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 54.9 in (1395 mm) · 58.6 in (1488 mm) with outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 16.6 in (421 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to top of tower):\u003c\/strong\u003e 29.7 in (754 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull:\u003c\/strong\u003e Catamaran\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom:\u003c\/strong\u003e Quad-outboard capable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurations:\u003c\/strong\u003e Pilot house or full tower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Freedom 56 catamaran hull\u003c\/li\u003e\n\u003cli\u003eFull pilot house configuration\u003c\/li\u003e\n\u003cli\u003eFull tower configuration\u003c\/li\u003e\n\u003cli\u003eComplete deck and structural components\u003c\/li\u003e\n\u003cli\u003eQuad-outboard capable transom\u003c\/li\u003e\n\u003cli\u003eDetailed exterior components\u003c\/li\u003e\n\u003cli\u003eFull-size STL files\u003c\/li\u003e\n\u003cli\u003eSplit STL version for 250 × 250 mm printers\u003c\/li\u003e\n\u003cli\u003eTMRC Freedom 56 Pilot House Build Guide (PDF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003eYou don't need a massive-format printer to build a massive RC boat. The split version is designed to fit printers with a minimum 250 × 250 mm build area — print the sections, assemble the hull, and put together one seriously impressive RC catamaran.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42926215790677,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/hf_20261103_154256_2e0b17c4-4c64-40a1-9d02-ac134e6cc12f.png?v=1793720636"},{"product_id":"pre-order-tmrc-viper-37-stl-pack-1","title":"TMRC Viper 37 STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_Viper_37_Build_Guide.pdf?v=1793587096\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC VIPER 37\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTwin V3 performance catamaran. 938 mm. Split version prints on a 250 × 250 mm bed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA completely new performance RC catamaran built around twin TMRC V3 outboards. At 938 mm (36.9″) long and 293 mm (11.5″) wide, the Viper combines an aggressive low-profile design with a full split configuration sized for 250 × 250 mm printers.\u003c\/p\u003e\n\u003cp\u003eThis is a DIY RC project. Builders are responsible for printing, assembly, waterproofing, electronics installation, setup, and safe operation. Basic 3D-printing and RC experience is recommended.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 36.9″ \/ 938 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with Outboards:\u003c\/strong\u003e 41.1″ \/ 1044 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 11.5″ \/ 293 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Height:\u003c\/strong\u003e 4.7″ \/ 120 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (to top of outboards):\u003c\/strong\u003e 8.9″ \/ 226 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull:\u003c\/strong\u003e Catamaran, multi-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Twin TMRC V3 outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e 16 STL parts (large-format version) · 14 STL parts (split version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Printer (large-format version):\u003c\/strong\u003e 400 × 400 mm bed, 320 mm build height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Printer (split version):\u003c\/strong\u003e 250 × 250 mm bed, 240 mm build height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Viper 37 STL file package\u003c\/li\u003e\n\u003cli\u003eLarge-format version (3-piece hull) — for 400 × 400 mm printers\u003c\/li\u003e\n\u003cli\u003eSplit version (8-piece hull) — for 250 × 250 mm printers\u003c\/li\u003e\n\u003cli\u003eDetailed cockpit and deck\u003c\/li\u003e\n\u003cli\u003eParts \u0026amp; exploded view guide (PDF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull build guide (PDF):\u003c\/strong\u003e print settings and step-by-step assembly, from printed parts to a sealed, painted hull\u003c\/li\u003e\n\u003cli\u003eDesigned as a fully functional RC boat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003eMinimum bed\u003c\/th\u003e\n\u003cth\u003eMinimum build height\u003c\/th\u003e\n\u003cth\u003eLargest part\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLarge-format\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 × 400 mm\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003ctd\u003eTop Console (393 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSplit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e250 × 250 mm\u003c\/td\u003e\n\u003ctd\u003e240 mm\u003c\/td\u003e\n\u003ctd\u003eHull sections (240 mm tall)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBoth versions are included. If your printer is smaller than 400 × 400 mm, print the split version.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, outboards, electronics, batteries, filament, paint, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat or engine manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42946174353493,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/download_f0a27cfa-2a70-497d-84af-076838ee4f33.jpg?v=1794977106"},{"product_id":"tmrc-seavee-322z-tower-upgrade-stl","title":"TMRC SeaVee 322Z Tower Upgrade — STL Add-On","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC SeaVee 322Z Tower Upgrade — STL Add-On\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSecond-Station Tower for the TMRC SeaVee 322Z\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADD-ON PACK.\u003c\/strong\u003e This is an upgrade for the \u003ca href=\"\/products\/pre-order-tmrc-seavee-322z-stl-pack\"\u003eTMRC SeaVee 322Z STL Pack\u003c\/a\u003e and does not include the hull, deck or console. You need the base SeaVee 322Z pack to use these files.\u003c\/p\u003e\n\u003cp\u003eTake the 322Z from a clean center console to a full offshore tower boat. The Tower Upgrade adds a complete second-station rollbar tower designed to the same \u003cstrong\u003eprint-first philosophy\u003c\/strong\u003e as the rest of the TMRC line — every tube, gusset and mounting point is drawn to print clean, assemble square, and hold up on the water.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesign Intent\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-height rollbar tower with integrated ladder geometry\u003c\/li\u003e\n\u003cli\u003eUpper helm station with console and seat cushion\u003c\/li\u003e\n\u003cli\u003eTower top with hardtop profile\u003c\/li\u003e\n\u003cli\u003eAlternate \u003cstrong\u003efixed radar-tower\u003c\/strong\u003e version for a lower, radar-dome look\u003c\/li\u003e\n\u003cli\u003eMounts to the existing SeaVee 322Z deck and hardtop footprint\u003c\/li\u003e\n\u003cli\u003eProportioned for scale realism without upsetting the boat's balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTower Rollbar STL (main tower frame and legs)\u003c\/li\u003e\n\u003cli\u003eTower Console STL (upper helm station)\u003c\/li\u003e\n\u003cli\u003eTower Cushion STL (upper seat)\u003c\/li\u003e\n\u003cli\u003eTower Top STL\u003c\/li\u003e\n\u003cli\u003eFixed Radar Tower Version STL (alternate one-piece tower)\u003c\/li\u003e\n\u003cli\u003eTMRC Personal Use License (PDF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 100% (towers and rollbars print solid for strength)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Yes — required for the tower frame\u003c\/li\u003e\n\u003cli\u003ePrint tube sections upright in the provided orientation\u003c\/li\u003e\n\u003cli\u003eTest-fit legs to the hardtop before final glue-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Size\u003c\/h3\u003e\n\u003cp\u003eEvery part fits a standard build plate except the \u003cstrong\u003eTower Top\u003c\/strong\u003e, which is the only large piece. On a smaller machine, split the top down the middle in your slicer, print the two halves, and glue them — the seam sits on the centerline and disappears with a light sand.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequires\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTMRC SeaVee 322Z STL Pack (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, hull, deck, motors, electronics or fasteners included. Files are delivered as a ZIP download immediately after purchase — extract on a computer before printing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":42946404876373,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC_SeaVee_322Z_Tower_Render_1_b63bec3b-c623-4a6f-977f-f8d57d9e5274.jpg?v=1788556678"},{"product_id":"pre-order-tmrc-trojan-55-stl-pack","title":"Pre Order TMRC Trojan 55 STL Pack","description":"\u003cp\u003e\u003cem\u003e\u003csmall\u003eImage note: The picture above is an AI-generated rendering, not the actual boat. To see the actual Trojan 55, watch the video of the model on the computer in the product gallery.\u003c\/small\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC TROJAN 55\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTwin inboard, straight shaft. 55 inches long. Prints on a 420 × 420 mm bed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order price: $59.99. Price goes to $119.99 on official release.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigital Pass members: you don't need to pre-order.\u003c\/strong\u003e You'll get this pack as a member drop when it releases.\u003c\/p\u003e\n\u003cp\u003eA big twin-inboard RC boat running straight-shaft drives. At 55″ (1397 mm) long, the Trojan 55 is one of the largest TMRC designs yet, and it comes with a full bill of materials so you know exactly what to buy and where to get it.\u003c\/p\u003e\n\u003cp\u003eThis is a DIY RC project. Builders are responsible for printing, assembly, waterproofing, electronics installation, setup, and safe operation. Basic 3D-printing and RC experience is recommended.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 55″ \/ 1397 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Twin inboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Straight shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Printer:\u003c\/strong\u003e 420 × 420 mm (e.g. Anycubic Kobra 3 Max)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Trojan 55 STL file package\u003c\/li\u003e\n\u003cli\u003eFull BOM (bill of materials) with sources for every part\u003c\/li\u003e\n\u003cli\u003eDesigned as a fully functional RC boat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull:\u003c\/strong\u003e 4 walls, 5% infill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRollbars \/ towers:\u003c\/strong\u003e 100% infill\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom, shaft exits and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003e\u003cstrong\u003eGet SUNLU PETG here\u003c\/strong\u003e\u003c\/a\u003e (affiliate link).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe Trojan 55 is sized for printers with a minimum \u003cstrong\u003e420 × 420 mm\u003c\/strong\u003e build area, such as the Anycubic Kobra 3 Max. You may be able to print it on a smaller printer, but \u003cstrong\u003ea split version for smaller beds is not offered at this time\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/4qNYWzw\" target=\"_blank\" rel=\"noopener sponsored\"\u003e\u003cstrong\u003eGet the Anycubic Kobra 3 Max here\u003c\/strong\u003e\u003c\/a\u003e (Amazon affiliate link).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePre-Order\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a pre-order. Files are not available for immediate download.\u003c\/strong\u003e The Trojan 55 is a large build and will take some time. The final STL package and BOM are expected to be available in \u003cstrong\u003eapproximately three months\u003c\/strong\u003e. Release timing is subject to final testing and development, and minor revisions may be made before release to improve printability, fitment, durability, or performance.\u003c\/p\u003e\n\u003cp\u003eAll pre-order sales are final — no refunds, returns, exchanges, or cancellations.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, batteries, filament, paint, shafts, couplers, or drive components included. The BOM lists where to source them.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat or engine manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":43030933241941,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/1FE5F29A-B2F1-4FE5-B9AF-C09542B1C321.png?v=1790019659"},{"product_id":"tmrc-raptor-30cc-stl-pack-prototype","title":"TMRC Raptor 30CC STL Pack","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTMRC RAPTOR 30CC\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA 30-inch offshore center console with a hardtop, leaning post and single outboard — built for the TMRC V3 outboard platform and sized to print on a 250 × 250 mm bed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raptor 30CC brings the full center-console look to a compact hull. Stepped sheer, forward seating, a hardtop with rod holders, a leaning post with twin seats, and a single outboard off the transom. It is designed for RC builders who want a fast, scale-looking boat that fits a standard desktop printer.\u003c\/p\u003e\n\u003ch3\u003eRuns the TMRC V3 outboard — ready to bolt up\u003c\/h3\u003e\n\u003cp\u003eThe transom is designed around the \u003cstrong\u003eTMRC V3 outboard platform\u003c\/strong\u003e. Any V3 outboard — Merc 300X, Merc Pro 400, Verado 350, Yammy 425 or DF300, as an STL pack, a fully printed ABS-CF motor, or a complete drive kit — bolts straight on with no adapter plate or modification. \u003ca href=\"\/collections\/outboard-motors-stl\"\u003eShop V3 outboards →\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 30 in (762 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Overall (with outboard):\u003c\/strong\u003e 37 in (940 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 10.7 in (272 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to hardtop):\u003c\/strong\u003e 11.8 in (300 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Single outboard — TMRC V3 platform, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Offshore center console with hardtop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers, 250 × 250 mm build area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete hull and deck with V3-ready transom\u003c\/li\u003e\n\u003cli\u003eCenter console and hardtop with rod holders\u003c\/li\u003e\n\u003cli\u003eLeaning post with twin seats\u003c\/li\u003e\n\u003cli\u003eForward seating and bow cushion\u003c\/li\u003e\n\u003cli\u003eScale outboard body (display — V3 motor, lower unit and electronics sold separately)\u003c\/li\u003e\n\u003cli\u003eTrim tabs and deck details\u003c\/li\u003e\n\u003cli\u003eComplete STL file pack, split for 250 × 250 mm printers\u003c\/li\u003e\n\u003cli\u003eLicense \u0026amp; Disclaimer PDF with suggested print settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSuggested Print Settings\u003c\/h3\u003e\n\u003cp\u003eOur usual TMRC settings. This design hasn't been test-printed by us yet, so treat them as a starting point and check transom fit before committing to the whole hull.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS \/ ABS-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb or gyroid) — 15–20% around the transom and motor mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop \/ Bottom:\u003c\/strong\u003e 4 \/ 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required (bow sections, hardtop, console overhangs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Glue sections with CA or epoxy, fill and sand seams, seal the hull interior before electronics go in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" rel=\"noopener sponsored\" target=\"_blank\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":46346504110165,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-10-13213638.png?v=1791942083"},{"product_id":"tmrc-predator-36cc-stl-pack-prototype","title":"TMRC Predator 36CC STL Pack","description":"\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTMRC PREDATOR 36CC\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA 36-inch offshore center console with a hardtop, twin bucket helm seats and twin outboards — the big brother of the Raptor 30CC, built for the TMRC V3 outboard platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Predator 36CC takes everything builders liked about the Raptor and scales it up to a twin-engine offshore machine. Full center-console layout with a forward console lounge, a hardtop with rod holders, twin bucket seats at the helm, wraparound bow seating, and a pair of outboards hanging off the transom. Print it split on a standard 250 × 250 mm printer, or full-width on a 350 × 350 mm machine for fewer seams.\u003c\/p\u003e\n\u003ch3\u003eTwin TMRC V3 outboards — ready to bolt up\u003c\/h3\u003e\n\u003cp\u003eThe transom is designed around a pair of \u003cstrong\u003eTMRC V3 outboards\u003c\/strong\u003e, built on TFL lower units with 3660 brushless motor mounts and a steering ram. Any V3 outboard — as an STL pack, a fully printed ABS-CF motor, or a complete drive kit — bolts straight on. \u003ca href=\"\/collections\/outboard-motors-stl\"\u003eShop V3 outboards →\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 36 in (913 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Overall (with outboards):\u003c\/strong\u003e 43.5 in (1,104 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 12.9 in (327 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight (keel to hardtop):\u003c\/strong\u003e 12.6 in (318 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Twin outboards — TMRC V3 platform, TFL lower units, 35 mm brushless motor mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Offshore center console with hardtop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers — split version for 250 × 250 mm beds, full-width version for 350 × 350 mm beds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete hull and deck with twin-outboard transom\u003c\/li\u003e\n\u003cli\u003eCenter console with forward console lounge\u003c\/li\u003e\n\u003cli\u003eHardtop with rod holders\u003c\/li\u003e\n\u003cli\u003eTwin bucket helm seats\u003c\/li\u003e\n\u003cli\u003eWraparound bow seating and cushions\u003c\/li\u003e\n\u003cli\u003eTwin scale outboard cowlings (display — V3 motors, lower units and electronics sold separately)\u003c\/li\u003e\n\u003cli\u003eSteering ram mount and deck details\u003c\/li\u003e\n\u003cli\u003eComplete STL pack in two versions: split for 250 × 250 mm printers and full-width for 350 × 350 mm printers\u003c\/li\u003e\n\u003cli\u003eLicense \u0026amp; Disclaimer PDF with suggested print settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSuggested Print Settings\u003c\/h3\u003e\n\u003cp\u003eOur usual TMRC settings. This design hasn't been test-printed by us yet, so treat them as a starting point and check transom fit before committing to the whole hull.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS \/ ABS-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb or gyroid) — 15–20% around the transom, 100% on motor mounts and the hardtop frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop \/ Bottom:\u003c\/strong\u003e 4 \/ 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required (bow sections, hardtop, console overhangs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Glue sections with CA or epoxy, fill and sand seams, seal the hull interior before electronics go in. Split version: glue the centerline halves, then fill and sand the seam before glassing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" rel=\"noopener sponsored\" target=\"_blank\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":46383222685781,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-10-16172515.png?v=1792187645"},{"product_id":"tmrc-freedom-56-pilot-house-desk-model-stl","title":"TMRC Freedom 56 Pilot House — Print-in-Place Desk Model STL","description":"\u003cp\u003e\u003cstrong\u003eDigital STL file, not a physical model. Display model only — not a functional RC boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC FREEDOM 56 PILOT HOUSE — DESK MODEL\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Freedom 56 Pilot House catamaran as a print-in-place desk model.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur 56-inch offshore catamaran, shrunk down for your desk, shelf or office. Everything prints in place with no splitting. The hull, tower, pilot house and motors each print on their own, then you just glue them together and display it.\u003c\/p\u003e\n\u003ch3\u003ePrint it at any size\u003c\/h3\u003e\n\u003cp\u003eNo minimum printer size. Scale the model up or down in your slicer to whatever size fits your printer and your space.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TMRC Freedom 56 Pilot House catamaran\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Print-in-place desk model (display only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Hull, tower, pilot house and motors print separately and glue together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Scale to any size — no minimum printer size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint-in-place Freedom 56 Pilot House desk model STL\u003c\/li\u003e\n\u003cli\u003eLicense \u0026amp; Disclaimer PDF with suggested print settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PLA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRollbar:\u003c\/strong\u003e 100% infill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWant the real thing?\u003c\/h3\u003e\n\u003cp\u003eThe full-size, RC-ready Freedom 56 Pilot House Edition is available as a complete STL pack. \u003ca href=\"\/products\/tmrc-freedom-56-pilot-house-edition-complete-stl-pack\"\u003eSee the Freedom 56 Pilot House Edition →\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrint it in \u003cstrong\u003eSUNLU PLA\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PLA filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nThis is a \u003cstrong\u003edisplay model only\u003c\/strong\u003e and is not designed to float or run as an RC boat.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":46550838706261,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/D0ECF229-4B63-4AFA-B1DE-944B767EA5AE.jpg?v=1793240915"},{"product_id":"pre-order-tmrc-storm-60-catamaran-stl-pack","title":"Pre Order TMRC Storm 60 Catamaran STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC STORM 60\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTwin-hull catamaran yacht. Twin TFL surface drives. About 5 ft long. Prints on a 420 × 420 mm bed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order price: $59.99. Price goes to $119.99 on official release.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigital Pass members: you don't need to pre-order.\u003c\/strong\u003e You'll get this pack as a member drop when it releases.\u003c\/p\u003e\n\u003cp\u003eSomething that's never been done before. The Storm 60 is a full catamaran yacht built around twin TFL surface drives, and every piece of it is 3D printed. At roughly 5 feet overall, it's one of the biggest and most ambitious TMRC designs yet, pushing the boundaries of what can be built with 3D printing.\u003c\/p\u003e\n\u003cp\u003eThis is a DIY RC project. Builders are responsible for printing, assembly, waterproofing, electronics installation, setup, and safe operation. Basic 3D-printing and RC experience is recommended.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull type:\u003c\/strong\u003e Twin-hull catamaran yacht\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull length:\u003c\/strong\u003e approx. 50″ \/ 1274 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length:\u003c\/strong\u003e approx. 60″ \/ 1536 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e approx. 20″ \/ 506 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e approx. 22″ \/ 561 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Twin TFL surface drives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Printer:\u003c\/strong\u003e 420 × 420 mm (e.g. Anycubic Kobra 3 Max)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e FDM 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull:\u003c\/strong\u003e 4 walls, 5% infill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRollbars \/ towers:\u003c\/strong\u003e 100% infill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor mounts:\u003c\/strong\u003e 100% infill\u003c\/li\u003e\n\u003cli\u003eEverything else: 4 walls, 5% infill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003e\u003cstrong\u003eGet SUNLU PETG here\u003c\/strong\u003e\u003c\/a\u003e (affiliate link).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe Storm 60 is sized for printers with a minimum \u003cstrong\u003e420 × 420 mm\u003c\/strong\u003e build area, such as the Anycubic Kobra 3 Max. A split version for smaller beds is not offered at this time.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/amzn.to\/4qNYWzw\" target=\"_blank\" rel=\"noopener sponsored\"\u003e\u003cstrong\u003eGet the Anycubic Kobra 3 Max here\u003c\/strong\u003e\u003c\/a\u003e (Amazon affiliate link).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePre-Order\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a pre-order. Files are not available for immediate download.\u003c\/strong\u003e The Storm 60 STL package is scheduled for release on \u003cstrong\u003eJanuary 1, 2027\u003c\/strong\u003e. Release timing is subject to final testing and development, and minor revisions may be made before release to improve printability, fitment, durability, or performance.\u003c\/p\u003e\n\u003cp\u003eAll pre-order sales are final — no refunds, returns, exchanges, or cancellations.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, surface drives, motors, electronics, batteries, filament, or paint included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003e\nAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003e\nFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003e\nThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat or engine manufacturer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":46563965403221,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/Screenshot2026-10-28220847.png?v=1793239875"},{"product_id":"tmrc-32-offshore","title":"TMRC 32 Offshore STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical boat.\u003c\/strong\u003e The TMRC 32 Offshore is a 3D printable RC center console modeled after the Yellowfin 32 Offshore and built on our proven TMRC 42 Offshore hull, designed for RC use. Twin outboard setup, T-top with hardtop, full console, leaning post and helm seats. Works with TMRC outboards and hardware.\u003c\/p\u003e\n\u003cdiv style=\"border:1px solid #d0d7de;border-radius:8px;padding:12px 16px;margin:16px 0;\"\u003e\n\u003ch3 style=\"margin-top:0;\"\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 40.1\" hull, 45.3\" with outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 250 × 250 mm printers for every part except one T-top frame part (332 mm long), which needs a large-format printer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors:\u003c\/strong\u003e twin outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel:\u003c\/strong\u003e intermediate to advanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild guide:\u003c\/strong\u003e parts list and exploded views. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-32-Offshore-Build-Guide.pdf?v=1794018712\" target=\"_blank\" rel=\"noopener\"\u003eDownload the PDF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoat only.\u003c\/strong\u003e Outboards and drive hardware sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Type:\u003c\/strong\u003e Offshore center console\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Length:\u003c\/strong\u003e 40.1″ (1018 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with Outboards:\u003c\/strong\u003e 45.3″ (1151 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam:\u003c\/strong\u003e 14.4″ (365 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight to Gunnel:\u003c\/strong\u003e 8.1″ (205 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height (to top of T-top):\u003c\/strong\u003e 13.9″ (353 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Setup:\u003c\/strong\u003e Twin outboards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts:\u003c\/strong\u003e 33 STL parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum printer build volume:\u003c\/strong\u003e 250 × 250 mm for 32 of 33 parts; Rollbar A needs 335 × 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003eCompatible with TMRC hardware and outboard systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10-piece printable hull\u003c\/li\u003e\n\u003cli\u003eGunnels, floor, hatches and front rails\u003c\/li\u003e\n\u003cli\u003eConsole, leaning post, helm seats and rear seat\u003c\/li\u003e\n\u003cli\u003eT-top frame, hardtop, GPS bar and cover, outriggers\u003c\/li\u003e\n\u003cli\u003eMotor bracket and servo cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild guide (PDF):\u003c\/strong\u003e all 33 parts with sizes, plus exploded views of the hull, deck, cockpit and T-top\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-32-Offshore-Build-Guide.pdf?v=1794018712\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Only where required\u003c\/li\u003e\n\u003cli\u003eIncrease infill around the transom and motor mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat You Need to Finish It\u003c\/h3\u003e\n\u003cp\u003eThis pack is the boat only. Outboards and drive hardware are sold separately: see the \u003ca href=\"\/collections\/outboard-motors-stl\"\u003eTMRC outboard STL files\u003c\/a\u003e and the \u003ca href=\"\/products\/tmrc-complete-drive-system\"\u003eTMRC Complete Drive System\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" target=\"_blank\" rel=\"noopener sponsored\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBuild Level\u003c\/h3\u003e\n\u003cp\u003eIntermediate to advanced. Recommended for builders with experience assembling large RC boats and 3D-printed projects.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDISCLAIMER\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, sharing, uploading, or commercial use is prohibited without the written permission of Tremendous Marine RC.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with Yellowfin Yachts or any real-world boat manufacturer\u003c\/strong\u003e. All brand names are referenced strictly for descriptive and inspirational purposes only.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":46652945530965,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/IMG_1313.png?v=1794032039"},{"product_id":"tmrc-bf350-v3-outboard-stl-pack","title":"TMRC BF350 V3 Outboard — STL Pack","description":"\u003cp\u003e\u003cstrong\u003eDigital STL files, not a physical motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTMRC BF350 V3 OUTBOARD — STL PACK\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDirect bolt-on for the TMRC 3660 V3 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe newest motor in the TMRC outboard lineup. The BF350 V3 brings the big, rounded four-stroke cowl look to your build and runs on the same proven TMRC 3660 V3 platform and TFL lower unit setup as the rest of the V3 family, so it drops right onto any V3-ready transom.\u003c\/p\u003e\n\u003cp\u003eBuilt for serious RC offshore builds. Run one, or hang two, three or four across the transom.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9.1\" (231 mm), skeg to top of cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCowl:\u003c\/strong\u003e 3.0\" wide × 4.7\" long (77 × 120 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Point:\u003c\/strong\u003e 3.0\" (77 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 5.1\" (131 mm), front to back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiggest Printed Part:\u003c\/strong\u003e Midsection, 131 mm on its longest side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Compatibility:\u003c\/strong\u003e 3660 brushless water-cooled setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Compatibility:\u003c\/strong\u003e TFL lower unit (B54210)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Shaft:\u003c\/strong\u003e 4 mm stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Unit Mounting Hardware:\u003c\/strong\u003e 55 mm M2 screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering \/ Swivel Bolt:\u003c\/strong\u003e M3 × 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBF350 V3 cowling\u003c\/li\u003e\n\u003cli\u003eV3 midsection\u003c\/li\u003e\n\u003cli\u003eMounting hardware locations integrated into the design\u003c\/li\u003e\n\u003cli\u003eSTL files for 3D printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0597\/1374\/9077\/files\/TMRC-V3-Outboard-Build-Guide.pdf?v=1794092773\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#ffc21f;color:#1a1300;font-weight:600;padding:10px 18px;border-radius:6px;text-decoration:none;\"\u003eDownload the build guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG \/ ASA \/ ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 5% (3D Honeycomb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2–0.28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Heat inserts strongly recommended\u003c\/li\u003e\n\u003cli\u003eIncrease infill around high-stress mounting areas on aggressive setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFilament\u003c\/h3\u003e\n\u003cp\u003ePrinted in \u003cstrong\u003eSUNLU PETG\u003c\/strong\u003e. Get it here (affiliate link): \u003ca href=\"https:\/\/store.sunlu.com?sca_ref=11554757.OetPZf1JlD\u0026amp;utm_source=sunluaffiliate\u0026amp;utm_medium=sunluaffiliate\u0026amp;utm_campaign=sunluaffiliate\" rel=\"noopener sponsored\" target=\"_blank\"\u003eSUNLU PETG filament\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired Non-Printable Components (Not Included)\u003c\/h3\u003e\n\u003cp\u003eThese parts are not printable and must be sourced separately:\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAssembly Video\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/vJ56jMa7Hlc?si=cNOe1XT5LX-_ekv-\" rel=\"noopener\" target=\"_blank\"\u003eWatch the TMRC V3 outboard assembly walkthrough on YouTube\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDesigned For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance RC center consoles\u003c\/li\u003e\n\u003cli\u003eCatamarans\u003c\/li\u003e\n\u003cli\u003eOffshore race builds\u003c\/li\u003e\n\u003cli\u003eTwin, triple, quad, and quint outboard setups\u003c\/li\u003e\n\u003cli\u003eScale replica projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eDigital Download Only\u003c\/h3\u003e\n\u003cp\u003eNo hardware, motors, electronics, shafts, couplers, or drive components included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDISCLAIMER\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003edigital STL file\u003c\/strong\u003e. No physical product will be shipped.\u003cbr\u003eAll sales are final. Due to the nature of digital downloads, \u003cstrong\u003eno refunds or exchanges\u003c\/strong\u003e are offered.\u003cbr\u003eFiles are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited.\u003cbr\u003eThis is an \u003cstrong\u003eoriginal Tremendous Marine RC design\u003c\/strong\u003e and is \u003cstrong\u003enot affiliated with, endorsed by, or associated with any real-world boat or engine manufacturer\u003c\/strong\u003e. TMRC is not affiliated with American Honda Motor Co., Inc. or Honda Marine.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTMRC\u003c\/strong\u003e\u003cbr\u003eHandcrafted performance.\u003cbr\u003eBuilt by enthusiasts, for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStay Tremendous.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tremendous Marine RC","offers":[{"title":"Default Title","offer_id":46660130439253,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/tremendousmarinerc.com\/collections\/black-friday.oembed","provider":"Tremendous Marine RC","version":"1.0","type":"link"}